📚 Complete guide for installing and configuring Klipper firmware for Creality K1, K1C, K1 Max, K1 SE printers
- 🚀 Quick Start
- 📥 Firmware Installation
- 🎓 Training & Consultation
- 📝 Macros
- 🔧 Modifications
- ⚙️ Advanced Settings
- 💡 Useful Materials
- ❓ FAQ
📥 Latest firmware version with installation instructions - start reading here!
- Simple AF Firmware Overview - advanced variant (requires Z sensor)
- Additional Lecture Materials - useful models and information
- Helper Script Menu - what's not written anywhere else...
- K1C Error Codes | K1 MAX Error Codes
- Reading Shaper Graphs - quick guide to shaper analysis
- Belt Tension Adjustment - understanding belt tension graphs
For detailed installation instructions, see version_config
Online Consultations and Training - personalized training for printer operation and firmware setup (Russian language)
- Useful Macros - simplify work with a dedicated macro section
- Retraction Control During Print - advanced settings (not for everyone)
- Print Organization Tips - useful details for the printing process
- Delayed Print Timer - specific use case, but can be helpful
- Skip Self-Check After Reset - speed up after factory reset
- Recommended Upgrades - what to buy to make your printer love you
- Latest Printable Modifications - most up-to-date models in Telegram group
- Replace Unicorn with Volcano - cost reduction for tough materials
- Install Creality K2 Plus Hotend - increase maximum volumetric flow
- Install Glass to Fix Warping - video tutorial
- Quick Bed Tilt Fix - video tutorial
How to quickly identify Unicorn or Volcano:
- If you can see a hole on the hotend radiator with a hex bolt → Volcano
- If the radiator has no holes → Unicorn
| Volcano | Unicorn |
|---|---|
 |
 |
⚠️ Warning! Mods in this section are for experienced users. Proceed at your own risk.
- Why Single-Board Computer? - install Spoolman, Telegram Bot, Klipperscreen
- Raspberry Pico Expansion - additional pins for modifications
Chamber Heating Manual Collection
- Connect Chamber Heater - for printing ABS and similar materials
- Install iHeater - universal solution for any Klipper printer
- Advanced Chamber with MCU - variant with additional controller
- SFS 2.0 Filament Sensor - detects breaks, jams, and tangles
- BTT Eddy - BTT Eddy sensor installation
- BTT Eddy Holder - printable model
- Cartographer 3D - alternative to load cell sensors
- Roborock Fan - improved cooling for PLA/TPU
- Install RJ45 - wired internet (requires soldering)
- WLED Lighting - RGB lighting for printer
- Virtual Pins - extended control via virtual pins
- Custom Macro - understanding Creality macro system
- Printer Board Pinout - for enthusiasts
- Creality Bootloader - official firmware
- FBP Mod - replace stock parts with printed ones
- Switch to Pure Klipper - without Creality
- Updated Strain Gauge Mod - automated installation
- Install MANTA 8 - motherboard replacement
- Connect OrangePi - control computer replacement
- FAQ Before First Use -
⚠️ outdated but may be useful
- Telegram Group - Russian-speaking K1 user community
- Author's Telegram Channel - news and updates
- ERCF - multi-material system
Q: Which firmware version should I use?
A: See Firmware Installation section - current version is described there
Q: Do I need to do all modifications?
A: No! Start with basic firmware installation. Add modifications as needed
Q: How to identify nozzle type?
A: See Modifications section - visual differences are shown there
Q: Where to find printable models for modifications?
A: Latest models on Telegram
- 📧 Telegram Channel: @tombraider2006
- 💬 Telegram Group: Creality K1 RUS
- 🎓 Training: Online Consultations (Russian)
- 💝 Support Project: Tinkoff