chore(templates): Update vehicle templates with latest parameters

Author: amilcarlucas

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/AirCar_v1/vehicle_components.json

@@ -190,5 +190,5 @@
             "Notes": ""
         }
     },
-    "Program version": "4.1.0"
+    "Program version": "4.3.3"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/Big_Owl/vehicle_components.json

@@ -190,6 +190,6 @@
             "Notes": ""
         }
     },
-    "Program version": "4.1.0",
+    "Program version": "4.3.3",
     "Configuration template": "Tarot_X4"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/Chimera7/vehicle_components.json

@@ -190,5 +190,5 @@
             "Notes": "A cheap WiFi alternative to the more commonly used 3DR and RFDesigns telemetry modems"
         }
     },
-    "Program version": "4.1.0"
+    "Program version": "4.3.3"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/Demo32Motor_PeterHall/vehicle_components.json

@@ -190,5 +190,5 @@
             "Notes": ""
         }
     },
-    "Program version": "4.1.0"
+    "Program version": "4.3.3"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/ESM450X-Des/10_battery_monitor.param

@@ -1,4 +1,4 @@
 BATT_AMP_PERVLT,36.363998
+BATT_FS_VOLTSRC,0  # Will monitor raw voltage only. So battery is not pushed to its limits in failsafes.
 BATT_MONITOR,4  # Selected in component editor window
 BATT_VOLT_MULT,18.181999
-BATT_FS_VOLTSRC,0  # Will monitor raw voltage only. So battery is not pushed to its limits in failsafes.

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/ESM450X-Des/vehicle_components.json

@@ -58,7 +58,7 @@
             "Specifications": {
                 "Chemistry": "Lipo",
                 "Volt per cell max": 4.2,
-                "Volt per cell arm": 3.6,
+                "Volt per cell arm": 3.5,
                 "Volt per cell low": 3.5,
                 "Volt per cell crit": 3.3,
                 "Volt per cell min": 3.3,
@@ -190,6 +190,6 @@
             "Notes": ""
         }
     },
-    "Program version": "4.3.1",
+    "Program version": "4.3.3",
     "Configuration template": "Holybro_X500_V2"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/FETtec-5/vehicle_components.json

@@ -190,6 +190,6 @@
             "Notes": ""
         }
     },
-    "Program version": "4.1.0",
+    "Program version": "4.3.3",
     "Configuration template": "ReadyToSkyZD550"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/GazeboIrisWithTargetFollow/vehicle_components.json

@@ -190,6 +190,6 @@
             "Notes": ""
         }
     },
-    "Program version": "4.1.0",
+    "Program version": "4.3.3",
     "Configuration template": "4.5.x-params"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/Holybro_X500/vehicle_components.json

@@ -190,5 +190,5 @@
             "Notes": "100mW at 433MHz, 13.6g without antenna + \n7.4g for 433MHz antenna"
         }
     },
-    "Program version": "4.1.0"
+    "Program version": "4.3.3"
 }

ardupilot_methodic_configurator/vehicle_templates/ArduCopter/Holybro_X500_V2/vehicle_components.json

@@ -190,6 +190,6 @@
             "Notes": "100mW at 433MHz, 13.6g without antenna + \n7.4g for 433MHz antenna"
         }
     },
-    "Program version": "4.1.0",
+    "Program version": "4.3.3",
     "Configuration template": "X11_plus"
 }