Version 0.6.3 I have PAS600. Latest FW002.005.000 After upgrade to 0.6.3 lost some info from devices

[AlexSanLV]

After upgrading to 0.6.3 all devices (PowerTags) again become visible and all objects seen. After some period part of information from power Tags changed status to "Not Available". For Powertag Acti 9 1P+Wire from previously found 27 objects now seen only 12.

From these 12 energy delivered.. info status "not available". (Partial active energy delivered phase B, Partial active energy received phase B, Total active energy delivered phase B, Total active energy received phase B).

In attach parameters I see directly from PAS600 device for this powertag.

[Breina]

Since v0.6.0, I've made the code asynchronous. This means that retrieving data does not block HomeAssistant any more, and this also means faster startup. But a consequence is that entities now take a few minutes before they're filled with data. I'm guessing (hoping!) that this is why some of your entities are Unavailable after upgrading. This should have resolved itself by now, otherwise something else is wrong. If not, please check your logs searching for 'powertag' for any helpful messages.

The energy delivered/received entities being Unavailable seems to be because your PowerTags don't have this data. They're supported on some devices, not supported on others. Hard to predict.

For example they do show up for my A9 M63 1P+N T, Firmware: 004.000.424, Hardware: 001.000.000

Can you give me your firmware / hardware versions? Then I might be able to deduce which versions support this and as then disable them for the ones that don't.

[AlexSanLV]

Hi, I have old enough PowerTag device - Acti 9 1P+Wire Firmware revision : 001.000.315. So I think this is a problem why I don't receive power information.. Will try to change it to newest device, hope it will help. But anyway thank you for your super integration!!