Skip to content

INSTALL_makefile.md

Latest commit

 

History

History
86 lines (78 loc) · 2.33 KB

INSTALL_makefile.md

File metadata and controls

86 lines (78 loc) · 2.33 KB

Makefile

To build the miniapp, first download hypre and METIS from the links above and put everything on the same level as the Laghos directory:

~> ls
Laghos/  v2.11.2.tar.gz  metis-4.0.3.tar.gz

Build hypre:

~> tar -zxvf v2.11.2.tar.gz
~> cd hypre-2.11.2/src/
~/hypre-2.11.2/src> ./configure --disable-fortran
~/hypre-2.11.2/src> make -j
~/hypre-2.11.2/src> cd ../..
~> ln -s hypre-2.11.2 hypre

For large runs (problem size above 2 billion unknowns), add the --enable-bigint option to the above configure line.

Build METIS:

~> tar -zxvf metis-4.0.3.tar.gz
~> cd metis-4.0.3
~/metis-4.0.3> make
~/metis-4.0.3> cd ..
~> ln -s metis-4.0.3 metis-4.0

This build is optional, as MFEM can be build without METIS by specifying MFEM_USE_METIS = NO below.

Clone and build the parallel version of MFEM:

~> git clone https://github.com/mfem/mfem.git ./mfem
~> cd mfem/
~/mfem> git checkout master
~/mfem> make parallel -j
~/mfem> cd ..

The above uses the master branch of MFEM. See the MFEM building page for additional details.

(Optional) Clone and build GLVis:

~> git clone https://github.com/GLVis/glvis.git ./glvis
~> cd glvis/
~/glvis> make
~/glvis> cd ..

The easiest way to visualize Laghos results is to have GLVis running in a separate terminal. Then the -vis option in Laghos will stream results directly to the GLVis socket.

(Optional) Build Caliper

  1. Clone and build Adiak:
~> git clone --recursive https://github.com/LLNL/Adiak.git
~> cd Adiak
~/Adiak> mkdir build && cd build
~/Adiak> cmake -DBUILD_SHARED_LIBS=On -DENABLE_MPI=On \
               -DCMAKE_INSTALL_PREFIX=../../adiak ..
~/Adiak> make && make install
~/Adiak> cd ../..
  1. Clone and build Caliper:
~> git clone https://github.com/LLNL/Caliper.git
~> cd Caliper
~/Caliper> mkdir build && cd build
~/Caliper> cmake -DWITH_MPI=True -DWITH_ADIAK=True -Dadiak_ROOT=../../adiak/ \
                 -DCMAKE_INSTALL_PREFIX=../../caliper ..
~/Caliper> make && make install
~/Caliper> cd ../..

Build Laghos

~> cd Laghos/
~/Laghos> make -j

This can be followed by make test and make install to check and install the build respectively. See make help for additional options.

See also the make setup target that can be used to automated the download and building of hypre, METIS and MFEM.