INTERNAL RF CRSF JUMPER TPROV2

[LONEWOFT1979]

I need your help.
Due to an error in the internal memory of the tprov2 jumper and my own ignorance, I had to flash it, and that's where my big mistake came in. Taking advantage of the situation, I installed the wrong firmware, 2.11, but it seems it was for another radio. This caused the transmitter to freeze, and on other occasions, the screen to mirror. After several attempts, I managed to remove everything and install firmware PRODUCTION-10-5-23.zip. Using buddy.edgetx.org, I was able to revive the radio. The problem I have now is that the internal module doesn't appear as crsf as it did before. It only shows multi. Therefore, I can't access the expresslrs script. Can someone guide me to solve this problem?

I should mention that the radio is new. I managed to update the TX module at the time; I have the bin file for that update and the lua file. I didn't get a chance to fly the drone when this happened. Since the memory is internal, I only have the root folders. Is it necessary to have the firmware(s) stored on it?
Can someone guide me?

[pfeerick]

Please write questions in English - you can use a translator like google translate or deepl.

Go to SYS -> HARDWARE and change the Internal RF type from MULTI to CRSF.

[LONEWOFT1979]

Please write questions in English - you can use a translator like google translate or deepl. ----OK

Go to SYS -> HARDWARE and change the Internal RF type from MULTI to CRSF. = MULTI/ OFF

[pfeerick]

Please re-read where I said to go (also mentioned as the second part of the ELRS Lua prompt)

SYS -> HARDWARE

Not

MDL -> SETUP

You should have exactly two options - MULTI and CRSF. Before you can select from the available options at the model level, first you need to configure which internal module the handset has.

Screen.Recording.2026-03-11.at.7.46.34.am.mov

Once you have gotten that setup properly, can you try this firmware and see if that is any different for you. It is the latest 2.11 firmware, and is specifically for the TPro V2.

https://buddy.edgetx.org/#/flash?version=v2.11.5&source=releases&target=tprov2

[LONEWOFT1979]

Oh, thank you!
so much, I've solved my big problem. Now to reconfigure the transmitter and receiver, lock it down, and finally fly.
“I was making a big deal out of nothing.”

[pfeerick]

Fantastic, enjoy! :)