Throttle Idle at switch on RM TX16 MK3

[oldnansome]

I have the above radio and latest iteration of Queen Annes Revenge. I have setup 3 fixed wing aircraft under Mode 2 (TAER) and in each instance the low throttle point is shown as 89%. Throttle cut shows the full -100%. Clearly an issue as when the radio is turned on the warning shows up Throttle Idle and I have to press to skip the warning. Although, to date no motors have fired up it is a concern. Any ideas on how to resolve the issue. I have tried using the throttle idle tab under in theThrottle menu to no avail

[3djc]

Rerun calibration and check radio mode

[OzDruiD]

@oldnansome as @3djc said - calibrate, but when you do - be careful not to overpush the gyballs and overdrive to 101% - more difficult with the metal max gymballs, but possible.

Additionaly, depending on your mode and how much you have tightened up the throttle tightness, their may be another mechanical interference issue that RM has a fix for, but mostly just try a reclibration first (System - Hardware) etc.