Description
the camera motion sensor is not available, deleted the camera from the integration and put it again, there is a box that said, enable motion sensor, I tick it enabled, still no motion sensor on the integration, here are some info of the camera, firmware and Camera control Version
Firmware: 1.3.17 Build 260112 Rel.54862n(4555)
Hardware: 1.0
Tapo: Cameras Control Version 7.1.17
Reproduction Steps
after you add the camera to the integration, no motion sensor is present.
Expected behavior
the tapo c200 camera should have an sensor entity for motion sensor.
If applicable, add error logs.
No response
Device Firmware
Firmware: 1.3.17 Build 260112 Rel.54862n(4555)
Integration Version
7.1.17
Last known working integration version
it was 2 patches before the patch that said that you fix the motion sensors, dunno.
Using stream component
No
Does camera work via official integrations?
Yes
HASS Environment
hassio image on VM
Search for similar issues
Yes
Additional information
No response
Debug Logs (Required)
home-assistant_2026-06-14T07-40-34.221Z.log
Description
the camera motion sensor is not available, deleted the camera from the integration and put it again, there is a box that said, enable motion sensor, I tick it enabled, still no motion sensor on the integration, here are some info of the camera, firmware and Camera control Version
Firmware: 1.3.17 Build 260112 Rel.54862n(4555)
Hardware: 1.0
Tapo: Cameras Control Version 7.1.17
Reproduction Steps
after you add the camera to the integration, no motion sensor is present.
Expected behavior
the tapo c200 camera should have an sensor entity for motion sensor.
If applicable, add error logs.
No response
Device Firmware
Firmware: 1.3.17 Build 260112 Rel.54862n(4555)
Integration Version
7.1.17
Last known working integration version
it was 2 patches before the patch that said that you fix the motion sensors, dunno.
Using stream component
No
Does camera work via official integrations?
Yes
HASS Environment
hassio image on VM
Search for similar issues
Yes
Additional information
No response
Debug Logs (Required)
home-assistant_2026-06-14T07-40-34.221Z.log