Add BUDGET E-ID BUD001

Author: LudovicRousseau

readers/BUDGET_BUD001.txt

@@ -0,0 +1,57 @@
+ idVendor: 0x048D
+  iManufacturer: Generic 
+ idProduct: 0x1365
+  iProduct: SmartCard Reader
+ bcdDevice: 1.00 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: Smart Card Reader Interface
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 3.750 MHz
+  dwMaximumClock: 7.500 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   Got 4 clock frequencies but was expecting 256
+   Support 0 kHz
+   Support 0 kHz
+   Support 0 kHz
+   Support 0 kHz
+  dwDataRate: 10080 bps
+  dwMaxDataRate: 312500 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   Support 0 bps
+   Support 0 bps
+   Support 0 bps
+   Support 0 bps
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x00010030
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x0000
+  bPINSupport: 0x00
+  bMaxCCIDBusySlots: 1

readers/supported_readers.txt

@@ -295,6 +295,9 @@
 0x0A5C:0x5864:Broadcom Corp 58200
 0x0A5C:0x5865:Broadcom Corp 58200
 
+# BUDGET
+0x048D:0x1365:BUDGET E-ID BUD001
+
 # C3PO
 0x0783:0x0007:C3PO TLTC2USB
 0x0783:0x0009:C3PO KBR36