Add Neowave LinkeoC-PRO

Author: LudovicRousseau

readers/Neowave_LinkeoC-PRO.txt

@@ -0,0 +1,119 @@
+ idVendor: 0x1E0D
+  iManufacturer: Neowave LinkeoC-PRO
+ idProduct: 0x0014
+  iProduct: LinkeoC-PRO
+ bcdDevice: 1.01 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 0
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: CL
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 3.685 MHz
+  dwMaximumClock: 14.320 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   Got 1 clock frequencies but was expecting 256
+   Support 3685 kHz
+  dwDataRate: 9909 bps
+  dwMaxDataRate: 848000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   Support 9909 bps
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000204BE
+   ....02 Automatic parameter configuration based on ATR data
+   ....04 Automatic activation of ICC on inserting
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   ..04.. Automatic IFSD exchange as first exchange (T=1)
+   02.... Short APDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x030E
+    3 lines
+   14 characters per line
+  bPINSupport: 0x03
+   PIN Verification supported
+   PIN Modification supported
+  bMaxCCIDBusySlots: 1
+ idVendor: 0x1E0D
+  iManufacturer: Neowave LinkeoC-PRO
+ idProduct: 0x0014
+  iProduct: LinkeoC-PRO
+ bcdDevice: 1.01 (firmware release?)
+ bLength: 9
+ bDescriptorType: 4
+ bInterfaceNumber: 1
+ bAlternateSetting: 0
+ bNumEndpoints: 3
+  bulk-IN, bulk-OUT and Interrupt-IN
+ bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
+ bInterfaceSubClass: 0
+ bInterfaceProtocol: 0
+  bulk transfer, optional interrupt-IN (CCID)
+ iInterface: CT
+ CCID Class Descriptor
+  bLength: 0x36
+  bDescriptorType: 0x21
+  bcdCCID: 1.10
+  bMaxSlotIndex: 0x00
+  bVoltageSupport: 0x07
+   5.0V
+   3.0V
+   1.8V
+  dwProtocols: 0x0000 0x0003
+   T=0
+   T=1
+  dwDefaultClock: 3.685 MHz
+  dwMaximumClock: 14.320 MHz
+  bNumClockSupported: 0 (will use whatever is returned)
+   Got 1 clock frequencies but was expecting 256
+   Support 3685 kHz
+  dwDataRate: 9909 bps
+  dwMaxDataRate: 848000 bps
+  bNumDataRatesSupported: 0 (will use whatever is returned)
+   Support 9909 bps
+  dwMaxIFSD: 254
+  dwSynchProtocols: 0x00000000
+  dwMechanical: 0x00000000
+   No special characteristics
+  dwFeatures: 0x000100BE
+   ....02 Automatic parameter configuration based on ATR data
+   ....04 Automatic activation of ICC on inserting
+   ....08 Automatic ICC voltage selection
+   ....10 Automatic ICC clock frequency change according to parameters
+   ....20 Automatic baud rate change according to frequency and Fi, Di params
+   ....80 Automatic PPS made by the CCID
+   01.... TPDU level exchange
+  dwMaxCCIDMessageLength: 271 bytes
+  bClassGetResponse: 0x00
+  bClassEnvelope: 0x00
+  wLcdLayout: 0x030E
+    3 lines
+   14 characters per line
+  bPINSupport: 0x03
+   PIN Verification supported
+   PIN Modification supported
+  bMaxCCIDBusySlots: 1

readers/supported_readers.txt

@@ -757,6 +757,7 @@
 0x4D55:0x0010:Mulann PVT
 
 # Neowave
+0x1E0D:0x0014:Neowave LinkeoC-PRO
 0x1E0D:0x0033:Neowave Weneo
 0x1E0D:0x1023:Neowave Weneo
 0x1E0D:0x8033:Neowave Weneo