audiomux

---

AudioMUX Click

AudioMUX Click demo application is developed using the NECTO Studio, ensuring compatibility with mikroSDK's open-source libraries and tools. Designed for plug-and-play implementation and testing, the demo is fully compatible with all development, starter, and mikromedia boards featuring a mikroBUS™ socket.

---

Click Library

• Author : MikroE Team
• Date : Jan 2020.
• Type : I2C type

Software Support

Example Description

The following demo shows basic Click functionality: Initializes AudioMUX device to work with the desired configurations and shows a message on uart when playing is started.

Example Libraries

• MikroSDK.Board
• MikroSDK.Log
• Click.AudioMUX

Example Key Functions

• audiomux_cfg_setup Config Object Initialization function.

void audiomux_cfg_setup ( audiomux_cfg_t *cfg );

• audiomux_init Initialization function.

err_t audiomux_init ( audiomux_t *ctx, audiomux_cfg_t *cfg );

• audiomux_default_cfg Click Default Configuration function.

void audiomux_default_cfg ( audiomux_t *ctx );

• This function performs a input selection and control. err_t audiomux_select_input ( audiomux_t *ctx, uint8_t input_sel, uint8_t mute_in,

                                      uint8_t mic_gain, uint8_t mic_state );

• This function performs a left or right volume control. err_t audiomux_set_volume ( audiomux_t *ctx, uint8_t volume1, uint8_t volume2,

                                    uint8_t side_sel );

• audiomux_set_treble_bass This function performs a control of the treble and bass for EQ section.

err_t audiomux_set_treble_bass ( audiomux_t *ctx, uint8_t treble, uint8_t bass );

Application Init

Initializes Click and logger driver.

void application_init ( void )
{
    log_cfg_t log_cfg;
    audiomux_cfg_t cfg;

    /** 
     * Logger initialization.
     * Default baud rate: 115200
     * Default log level: LOG_LEVEL_DEBUG
     * @note If USB_UART_RX and USB_UART_TX 
     * are defined as HAL_PIN_NC, you will 
     * need to define them manually for log to work. 
     * See @b LOG_MAP_USB_UART macro definition for detailed explanation.
     */
    LOG_MAP_USB_UART( log_cfg );
    log_init( &logger, &log_cfg );
    log_info( &logger, "---- Application Init ----" );

    //  Click initialization.

    audiomux_cfg_setup( &cfg );
    AUDIOMUX_MAP_MIKROBUS( cfg, MIKROBUS_POSITION_AUDIOMUX );
    audiomux_init( &audiomux, &cfg );

    init_check = 0;
    mess_cnt   = 0;

    log_info( &logger, "** AudioMUX initialized **\r\n" );
}

Application Task

Plays selected channel and shows output on the terminal.

void application_task ( void )
{
    if (init_check == 0)
    {
        audiomux_default_cfg ( &audiomux );
        init_check = 1;

        log_printf( &logger, "Playing from IN1 " );
        Delay_ms ( 1000 );
    }

    if (mess_cnt < 5)
    {
        log_printf( &logger, ". " );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        Delay_ms ( 1000 );
        mess_cnt++;
    }
}

Application Output

This Click board can be interfaced and monitored in two ways:

• Application Output - Use the "Application Output" window in Debug mode for real-time data monitoring. Set it up properly by following this tutorial.
• UART Terminal - Monitor data via the UART Terminal using a USB to UART converter. For detailed instructions, check out this tutorial.

Additional Notes and Information

The complete application code and a ready-to-use project are available through the NECTO Studio Package Manager for direct installation in the NECTO Studio. The application code can also be found on the MIKROE GitHub account.

---