WeAct_STM32F405RGT6 flash with ST-Link

[WillxE]

Hi, i was able to do it on the f401_blackpill and it was running fine

now that im trying to flash tinyuf2 on WeAct_STM32F405RGT6 but it doesnt seems to show as flashdrive.

the board.h and board.mk are based on feather_stm32f405_express
and modified some parts

board.h
/*

• The MIT License (MIT)
• Copyright (c) 2018 Ha Thach for Adafruit Industries
• Permission is hereby granted, free of charge, to any person obtaining a copy
• of this software and associated documentation files (the "Software"), to deal
• in the Software without restriction, including without limitation the rights
• to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
• copies of the Software, and to permit persons to whom the Software is
• furnished to do so, subject to the following conditions:
• The above copyright notice and this permission notice shall be included in
• all copies or substantial portions of the Software.
• THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
• IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
• FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
• AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
• LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
• OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
• THE SOFTWARE.
  */

#ifndef BOARD_H_
#define BOARD_H_

//--------------------------------------------------------------------+
// LED (WeAct Black Pill F405 has LED on PC13)
//--------------------------------------------------------------------+
#define LED_PORT GPIOB
#define LED_PIN GPIO_PIN_2
#define LED_STATE_ON 1

//--------------------------------------------------------------------+
// Neopixel
//--------------------------------------------------------------------+

//// Number of neopixels
#define NEOPIXEL_NUMBER 0

//--------------------------------------------------------------------+
// Flash
//--------------------------------------------------------------------+

// WeAct STM32F405RGT6 has 1MB of internal flash
#define BOARD_FLASH_SIZE (1024 * 1024)

//--------------------------------------------------------------------+
// USB UF2
//--------------------------------------------------------------------+

#define USB_VID 0x1209 // WeAct VID
#define USB_PID 0x4050 // WeAct PID
#define USB_MANUFACTURER "WeAct"
#define USB_PRODUCT "STM32F405RGT6"

#define UF2_PRODUCT_NAME USB_MANUFACTURER " " USB_PRODUCT
#define UF2_BOARD_ID "STM32F405-WeAct"
#define UF2_VOLUME_LABEL "WEACTBOOT"
#define UF2_INDEX_URL "https://www.weactstudio.com/"

#define USB_NO_VBUS_PIN 0
//--------------------------------------------------------------------+
// UART (WeAct default UART: USART1 - TX: PA9, RX: PA10)
//--------------------------------------------------------------------+
#define UART_DEV USART1
#define UART_CLOCK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
#define UART_CLOCK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
#define UART_GPIO_PORT GPIOA
#define UART_GPIO_AF GPIO_AF7_USART1
#define UART_TX_PIN GPIO_PIN_9
#define UART_RX_PIN GPIO_PIN_10

//--------------------------------------------------------------------+
// RCC Clock
//--------------------------------------------------------------------+
static inline void clock_init(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;

/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();

/* Configure voltage scaling */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

/* Enable HSE (8 MHz on WeAct STM32F405RGT6) and configure PLL */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; // (tried with just 8 also not working)
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
HAL_RCC_OscConfig(&RCC_OscInitStruct);

/* Configure system clock */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
}

board.mk
CFLAGS +=
-DSTM32F405xx
-DHSE_VALUE=8000000U

SRC_S +=
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s

flash: flash-dfu-util
erase: erase-jlink

#endif
am i missing something ? need help pleasee

[drashna]

the board doesn't have a VBUS pin, you need to disable it.

#define USB_NO_VBUS_PIN   1