chore: extend precommit with more hooks

Author: bramstroker

.pre-commit-config.yaml

@@ -44,6 +44,31 @@ repos:
         types: [python]
         require_serial: true
         files: ^custom_components/powercalc
+      - id: ty
+        name: ty
+        entry: uv run ty check custom_components/powercalc
+        language: system
+        pass_filenames: false
+        stages: [ manual ]
+        files: ^custom_components/powercalc/.*\.py$
+      - id: uv-lock
+        name: uv lock --check
+        entry: uv lock --check
+        language: system
+        pass_filenames: false
+        files: ^(pyproject\.toml|uv\.lock)$
+      - id: uv-lock-measure
+        name: uv lock --check (utils/measure)
+        entry: uv --directory utils/measure lock --check
+        language: system
+        pass_filenames: false
+        files: ^utils/measure/(pyproject\.toml|uv\.lock)$
+      - id: uv-lock-visualize
+        name: uv lock --check (utils/visualize)
+        entry: uv --directory utils/visualize lock --check
+        language: system
+        pass_filenames: false
+        files: ^utils/visualize/(pyproject\.toml|uv\.lock)$
 
   - repo: https://github.com/codespell-project/codespell
     rev: v2.4.1
@@ -55,6 +80,10 @@ repos:
     hooks:
       - id: check-github-workflows
         args: [ "--verbose" ]
+      - id: check-jsonschema
+        name: validate power profile model.json
+        args: [--schemafile, profile_library/model_schema.json]
+        files: ^profile_library/[^/]+/[^/]+/model\.json$
 
   - repo: https://github.com/rhysd/actionlint
     rev: v1.7.10
@@ -66,3 +95,9 @@ repos:
     hooks:
       - id: zizmor
         args: [--no-progress, --fix]
+
+  - repo: https://github.com/shellcheck-py/shellcheck-py
+    rev: v0.11.0.1
+    hooks:
+      - id: shellcheck
+        files: \.sh$

profile_library/bosch/Smart Home Controller 1 Gen/model.json

@@ -5,7 +5,7 @@
   ],
   "author": "Justin Hahn <justin.hahn@live.com>",
   "calculation_strategy": "fixed",
-  "created_at": "2025-04-10T00:41:25+01:00",
+  "created_at": "2025-04-09T23:41:25Z",
   "description": "The measured Bosch Smart Home Controller had the following devices connected: four Bosch Smart Home Radiator Thermostat II (TRV_GEN2), two Bosch Smart Home Radiator Thermostat I (TRV), and two Bosch Smart Home Door/Window Contact II (SWD2).During the 120-second measurement period, the temperature was adjusted both directly on the device itself and via the Smart Home Controller on one TRV thermostat and on one TRV_GEN2 thermostat. In addition, both window sensors were triggered twice each by opening and closing the windows.",
   "device_type": "generic_iot",
   "discovery_by": "device",

profile_library/dreo/DR-HAF001S/model.json

@@ -1,7 +1,7 @@
 {
   "author": "miggi92 <miggi92@users.noreply.github.com>",
   "calculation_strategy": "linear",
-  "created_at": "2025-07-14T09:52:08+02:00",
+  "created_at": "2025-07-14T07:52:08Z",
   "device_type": "fan",
   "linear_config": {
     "attribute": "percentage",

profile_library/dreo/DR-HTF001S/model.json

@@ -1,7 +1,7 @@
 {
   "author": "miggi92 <miggi92@users.noreply.github.com>",
   "calculation_strategy": "linear",
-  "created_at": "2025-07-14T10:15:08+02:00",
+  "created_at": "2025-07-14T08:15:08Z",
   "device_type": "fan",
   "linear_config": {
     "attribute": "percentage",

profile_library/dreo/DR-HTF002S/model.json

@@ -1,7 +1,7 @@
 {
   "author": "miggi92 <miggi92@users.noreply.github.com>",
   "calculation_strategy": "linear",
-  "created_at": "2025-07-14T10:10:08+02:00",
+  "created_at": "2025-07-14T08:10:08Z",
   "device_type": "fan",
   "linear_config": {
     "attribute": "percentage",

profile_library/shelly/Shelly 1 Gen3/model.json

@@ -16,7 +16,7 @@
   "calculation_strategy": "fixed",
   "only_self_usage": false,
   "config_flow_sub_profile_remarks": "Select a profile depending on your Shelly device configuration.",
-  "created_at": "2026-01-15T11:15:00+01:00",
+  "created_at": "2026-01-15T10:15:00Z",
   "author": "Michal Bartak <maxym.srpl@gmail.com>",
   "author_info": {
     "name": "Michal Bartak",

profile_library/shelly/Shelly 1/model.json

@@ -4,7 +4,7 @@
   ],
   "author": "Michal Bartak <maxym.srpl@gmail.com>",
   "calculation_strategy": "fixed",
-  "created_at": "2024-01-05T13:55:00+01:00",
+  "created_at": "2024-01-05T12:55:00Z",
   "device_type": "smart_switch",
   "discovery_by": "entity",
   "measure_description": "The measured device fw: 1.14.1-rc1, Eco Mode enabled, Wifi Client enabled. The result represents the average value of measurements collected from the measurement device API for the following scenarios: dumb device/baseline consumption (~4.9W), the the relay turned off, and the relay turned on.",

profile_library/shelly/Shelly 1L Gen3/model.json

@@ -5,7 +5,7 @@
   "author": "Victor Burlacu-Zane",
   "calculation_strategy": "fixed",
   "config_flow_sub_profile_remarks": "You need to select a profile depending on your settings.\nThe ECO setting only changes the power consumption in the listed configurations. Activating any other settings not listed in the profile name will change the power draw.\n\"WLAN + BT + ECO\": All three turned on, repeater turned off.\n\"WLAN + ECO\": Both turned on, repeater turned off.\n\"WLAN + BT\": Both turned on, repeater turned on, ECO turned off.\n\"WLAN\": Only WLAN turned on, all others off.\n\"Other combinations\": For all other combinations. Maximum device power draw.",
-  "created_at": "2026-01-05T20:06:00+01:00",
+  "created_at": "2026-01-05T19:06:00Z",
   "device_type": "smart_switch",
   "discovery_by": "entity",
   "measure_description": "Measured with disconnected load, for about 90 minutes and calculated average from values stored by Home Assistant. Multiple combinations of settings were tested. Firmware version 1.7.1 for the tested Shelly 1L Gen3 device. The power values are long-term averages measured while the device periodically wakes to maintain connectivity. Instantaneous power is higher during wakeups when the relay is off, but the average energy consumption is accurately reflected.",

profile_library/shelly/Shelly 1PM Mini Gen4/model.json

@@ -6,7 +6,7 @@
   "author": "Michal Bartak <maxym.srpl@gmail.com>",
   "calculation_strategy": "fixed",
   "config_flow_sub_profile_remarks": "You need to select a profile depending on your Shelly configuration.\nIf not sure, select 'Other combinations' which will report the highest possible draw.",
-  "created_at": "2025-11-29T10:48:00+01:00",
+  "created_at": "2025-11-29T09:48:00Z",
   "device_type": "smart_switch",
   "measure_description": "The measured device fw: 1.7.1. The result represents the average value of measurements collected from the measuring device API for the following scenarios: dumb device/baseline consumption (~3.8W) and several device configurations. See sub-profiles.",
   "measure_device": "Shelly PM Mini Gen3",

profile_library/shelly/Shelly 1PM/model.json

@@ -4,7 +4,7 @@
   ],
   "author": "Michal Bartak <maxym.srpl@gmail.com>",
   "calculation_strategy": "fixed",
-  "created_at": "2024-01-09T20:21:00+01:00",
+  "created_at": "2024-01-09T19:21:00Z",
   "device_type": "smart_switch",
   "discovery_by": "entity",
   "measure_description": "The measured device fw: 1.14.1-rc1, Eco Mode enabled, Wifi Client enabled, LED disabled. The result represents the average value of measurements collected from the measurement device API for the following scenarios: dumb device/baseline consumption (~4.9W), the the relay turned off, and the relay turned on.",