ChangeLog

Please contact me via e-mail tornado@odessaua.com for questions, corrections, and if I accidently left you out of the credits.
New for V3.0.1
	BUG FIX - duplicate data written when backing up
	Change credit names

New for V3
	-Added 13 new processors

		Broadcom BCM4716 Rev 1 CPU
		Broadcom BCM5354 KFBG Rev 3 CPU
		Broadcom BCM3345 KPB Rev 1 CPU
		Broadcom BCM6358 Rev 1 CPU
		Broadcom BCM6368 Rev 1 CPU
		Broadcom BCM4321L RADIO STOP
 		XScale IXP42X 266mhz
		GW234X (IXP42X 266MHz) BE
    		XScale IXP42X 400mhz,
    		XScale IXP42X 533mhz
    		ARM 940T
    		Marvell Feroceon 88F5181
    		LX4380

	-Added  25 New flash chip parts


		K8D3216UTC  2Mx16 TopB     (4MB)
		K8D3216UBC  2Mx16 BotB     (4MB)  
		Macronix MX25L1605D        (2MB) Serial 
		Macronix MX25L3205D        (4MB) Serial
		Macronix MX25L6405D        (8MB) Serial		
		STMicro M25P16             (2MB) Serial
		STMicro M25P32             (4MB) Serial
		STMicro M25P64             (8MB) Serial
		STMicro M25P128            (16MB) Serial
		MX29LV640B 4Mx16 TopB      (16MB)
		MX29LV640B 4Mx16 BotB      (16MB)
		Spansion S29GL128P U       (16MB)
		Spansion S29GL128M U       (16MB)
		Spansion S29GL256P U       (32MB)
		Spansion S29GL512P U       (64MB)
		Spansion S29GL01GP U       (128MB)		
		Spansion S25FL016A         (2MB) Serial
		Spansion S25FL032A         (4MB) Serial
		Spansion S25FL064A         (8MB) Serial
		Winbond W25X32             (4MB) Serial
		Winbond W25X64             (8MB) Serial
		EON EN29LV640 4Mx16 TopB   (8MB)
		EON EN29LV640 4Mx16 BotB   (8MB) 
		AT49BV322A 2Mx16 BotB      (4MB)
		AT49BV322A(T) 2Mx16 TopB   (4MB)

Added  switch  /swap_endian 
		swaps the endian of the  flash data – backup only

Added switch /flash_debug
		provides debug information when detecting flash chip 
		manufacturer and device ID

Added new option -probeonly:custom 
			requires only /window: when probing flash chips

Added preliminary SPI for detection and read/write to serial flash chips
		Big Thanks, Yoon Lee, Joey Goncalves, and openwrt kernel developers for the SPI code
 		and porting the Atheros base SPI to tjtag.

Added preliminary Broadcom SPI code, for detection and read/write on Broadcom based
 		processors.
		Big Thanks to eko@dd-wrt.com, for donating the WGR614v8 and endless
 		hours of testing with me, without, we would have no Broadcom SPI.

		Big Thanks to BrainSlayer – DD-WRT.COM for your support

		Big Thanks to Chip for his FON2200 and flash chip definitions and
 		testing on the FON 2200

		Also Big Thanks to all the others at DD-WRT for helping me test and
 		reporting back, RedHawk, Barryware, and others.

Added options to backup, flash, erase
		wgrv8bdata,  wgrv9bdata, cfe128


NOTES
SPI has only had limited testing, but has been verified to work on:

Fonera 2200A “Thanks for the donation desigabri”
DIR-300
WGR614v8	“Thanks Eko” - 128k CFE
WGR614v9	128k CFE

All of the above targets require a /swap_endian switch when backing up.
The WGR's require /noreset “BCM5354 processors” also the WGRV8 and WGRV9 have 128k CFE's. 

There are probably others it will work on as well, but due to the limited test targets available to me, this is all that has been tested.

There are a few newer commands and switches for these new routers.

For the wgr614v8 and wgr614v9 there are:

Board specific data “MAC address, etc”
Ex. backup:wgrv8bdata /noreset /swap_endian
EX. flash:wgrv8bdata /noreset

Board specific data “Mac address, etc”
Ex. backup:wgrv9bdata /noreset /swp_endian
Ex. backup:wgrv9nvram /noreset


 New for V2.1.3 - Added 4 new flash Chip parts to the list:
		       - EON EN29LV320 2Mx16 BotB   (4MB)
		       - EON EN29LV320 2Mx16 TopB   (4MB)
		       - Winbond W19B320AB BotB     (4MB)
		       - Winbond W19B320AT TopB     (4MB)
		         Corrected definitions for SST flash chips 
		         Corrected definitions for MX29LV320	
		Added support for Atheros 531x/231x processors
			Currently only WHR-HP-AG108 has been tested
			/nodma must be used for this router and is Big Endian	
		Added support for Linkstation 2 with RISC K4C chip
			Needs testing 
		Added support for Speedtouch 516v6, 546v6 and 585v6
			Needs testing
		Added new switch /ST5 for use with Speedtouch
		Added two new Processors 
			Broadcom BCM6338 Rev 1 CPU - Speedtouch
			Linkstation 2 with RISC K4C chip
              	Added  Winbond 3 Byte Device ID Detection
                      		Contributed by kb1klk@aetheriatech.org
		removed changelog.txt - replaced with changelog.doc		

 New for v2.0 -Added 13 new Flash Chip Parts to the list:
                     - Macronix MX25L160A         (2MB)
                     - W19B(L)320ST   2Mx16 TopB  (4MB)
                     - W19B(L)320SB   2Mx16 BotB  (4MB)
                     - M29DW324DT 2Mx16 TopB      (4MB)
                     - M29DW324DB 2Mx16 BotB      (4MB)
                     - TC58FVM6T2A  4Mx16 TopB    (8MB)
                     - TC58FVM6B2A  4Mx16 BopB    (8MB)
                     - K8D6316UTM  4Mx16 TopB     (8MB)
                     - K8D6316UBM  4Mx16 BotB     (8MB)
                     - Spansion S29GL032M BotB    (4MB)
                     - Spansion S29GL032M TopB    (4MB)
                     - Spansion S29GL064M BotB    (8MB)
                     - Spansion S29GL064M TopB    (8MB)
                 Added 2 New Processors
                     - Broadcom BCM4785 Rev 1 - WRT350N
                     - TI TNETV1060GDW
                 Added Spansion 3 Byte Device ID Workaround
                       Spansion Flash & TI TNETV1060GDW CPU
                       Contributed by kb1klk@aetheriatech.org
		Added Wiggler.png
		Added Changelog.txt, and removed from source.	




	

4.8.1 are Tornado mods 
New for v4.8.1 -Added 2 new Flash Chip Parts to the list:
                     - EN29LV160A  2Mx16 TopB     (2MB)
                     - EN29LV160A  2Mx16 BotB     (2MB)
                 Added 4 New Processors
                     - BCM5453 Rev 1
                     - BCM5453 Rev 2
                     - BCM5365 Rev 1
                     - BCM4704 Rev 9
                 Added the following New Switch Options
                     - /bypass .............Unlock Bypass
                       for AMD/Spansion type Flash Chips
                 Added /bsp option for use with flash, erase & backup
Note:
 My modifications - Thanks to HDM's great work
 tornado@odessaua.com


  New for v4.8 - Added 2 new Flash Chip Parts to the list:
                     - SST39VF6401B 4Mx16 BotB     (8MB)
                     - SST39VF6402B 4Mx16 TopB     (8MB)
               - Added the following New Switch Options
                     - /wiggler ........... use wiggler cable

  New for v4.7 - Added 2 new Flash Chip Parts to the list:
                     - K8D3216UTC  2Mx16 TopB     (4MB)
                     - K8D3216UBC  2Mx16 BotB     (4MB)

  New for v4.6 - Added Common Flash Chip Polling routine
               - Added "-probeonly" parameter (good idea jmranger)
               - Added Chip ID for Broadcom BCM4704 Rev 8 CPU
               - Added TRST Signal Support for Wiggler Cables
               - Added Chip ID for BRECIS MSP2007-CA-A1 CPU
               - Added Experimental 1MB Flash Chip Offsets
               - Added 2 new Flash Chip Parts to the list:
                     - MX29LV800BTC 512kx16 TopB  (1MB)
                     - MX29LV800BTC 512kx16 BotB  (1MB)

  New for v4.5 - Added 2 new Flash Chip Parts to the list:
                     - K8D1716UTC 1Mx16 TopB      (2MB)
                     - K8D1716UBC 1Mx16 BotB      (2MB)

  New for v4.4 - Added PrAcc routines to support additional MIPS chips
                 without the ability to use EJTAG DMA Access
               - Added Chip ID for Broadcom BCM5365 Rev 1 CPU
               - Added Chip ID for Broadcom BCM6348 Rev 1 CPU (Big Endian)
               - Added Chip ID for Broadcom BCM6345 Rev 1 CPU
               - Added 6 new Flash Chip Parts to the list:
                     - SST39VF1601 1Mx16 BotB     (2MB)
                     - SST39VF1602 1Mx16 TopB     (2MB)
                     - SST39VF3201 2Mx16 BotB     (4MB)
                     - SST39VF3202 2Mx16 TopB     (4MB)
                     - SST39VF6401 4Mx16 BotB     (8MB)
                     - SST39VF6402 4Mx16 TopB     (8MB)
               - Added the following New Switch Options
                     - /noemw ............. prevent Enabling Memory Writes
                     - /nocwd ............. prevent Clearing CPU Watchdog Timer
                     - /dma ............... force use of DMA routines
                     - /nodma ............. force use of PRACC routines (No DMA)
                     - /window:XXXXXXXX ... custom flash window base (in HEX)
                     - /start:XXXXXXXX .... custom start location (in HEX)
                     - /length:XXXXXXXX ... custom length (in HEX)
                     - /silent ............ prevent scrolling display of data
                     - /skipdetect ........ skip auto detection of CPU Chip ID
                     - /instrlen:XX ....... set instruction length manually
               - Added elapsed time to Backup, Erase, and Flash routines
               - Other minor miscellaneous changes/additions.

  New for v4.3 - Corrected Macronix Flash Chip Block Definitions.
               - Add 8 new Flash Chip Parts to the list:
                     - AT49BV/LV16X 2Mx16 BotB    (4MB)
                     - AT49BV/LV16XT 2Mx16 TopB   (4MB)
                     - MBM29LV160B 1Mx16 BotB     (2MB)
                     - MBM29LV160T 1Mx16 TopB     (2MB)
                     - MX29LV161B 1Mx16 BotB      (2MB)
                     - MX29LV161T 1Mx16 TopB      (2MB)
                     - ST M29W160EB 1Mx16 BotB    (2MB)
                     - ST M29W160ET 1Mx16 TopB    (2MB)

  New for v4.2 - Changed the chip_detect routine to allow for easier
                 additions of new chip id's.
               - Added detection support for the Broadcom BCM5350 chip.
               - Fixed DMA routines to check status bit that was
                 removed in prior version.
               - Removed clockout routine in an effort to speed up access.
               - Changed clockin routine in an effort to speed up access.
               - Changed ReadData and WriteData routines to merely call
                 ReadWriteData routine.
               - Removed Defines from .h file and placed flash areas in a
                 structure list for easier maintenance should they change.
               - Miscellaneous other minor changes.

 **************************************************************************

  tjtag : read/write flash memory via EJTAG
   usage: tjtag [parameter] </noreset> </noemw> </nocwd> </nobreak> </noerase>
                                         </notimestamp> </dma> </nodma>
                             	     <start:XXXXXXXX> </length:XXXXXXXX>
                                         </silent> </skipdetect> </instrlen:XX> </fc:XX> /bypass

              Required Parameter
              ------------------
              -backup:cfe
              -backup:nvram
              -backup:kernel
              -backup:wholeflash
              -backup:custom
              -backup:bsp
              -erase:cfe
              -erase:nvram
              -erase:kernel
              -erase:wholeflash
              -erase:custom
	  -erase:bsp
              -flash:cfe
              -flash:nvram
              -flash:kernel
              -flash:wholeflash
              -flash:custom
	   -flash:bsp
              -probeonly

              Optional Switches
              -----------------
              /noreset ...........      prevent Issuing EJTAG CPU reset
              /noemw .............    prevent Enabling Memory Writes
              /nocwd .............     prevent Clearing CPU Watchdog Timer
              /nobreak ...........     prevent Issuing Debug Mode JTAGBRK
              /noerase ...........      prevent Forced Erase before Flashing
              /notimestamp ....... prevent Timestamping of Backups
              /dma ...............       force use of DMA routines
              /nodma .............     force use of PRACC routines (No DMA)
              /start:XXXXXXXX ....   custom start location (in HEX)
              /length:XXXXXXXX ... custom length (in HEX)
              /silent ............      prevent scrolling display of data
              /skipdetect ........   skip auto detection of CPU Chip ID
              /instrlen:XX ....... set instruction length manually
              /wiggler ........... use wiggler cable
              /fc:XX = Optional (Manual) Flash Chip Selection
              /bypass ............ Enables Unlock bypass / disables sflash poll
                                         for AMD cmd type flash Chips

 **************************************************************************
  Written by HairyDairyMaid (a.k.a. - lightbulb)
  hairydairymaid@yahoo.com
 **************************************************************************