TESTING_GUIDE.md

Testing Guide - X1 Keyring Fix (v0.10.37)

Overview

This guide provides step-by-step instructions for testing the X1 blockchain keyring fix in Backpack wallet extension v0.10.37.

Prerequisites

• Chrome or Chrome-based browser (Brave, Edge, etc.)
• X1 wallet with seed phrase
• Some XNT tokens for testing transactions
• Test recipient address on X1

Installation Steps

1. Load the Extension in Chrome

1. Open Chrome Extensions Page

   • Navigate to chrome://extensions
   • Or click the puzzle icon → "Manage Extensions"

2. Enable Developer Mode

   • Toggle "Developer mode" in the top-right corner

3. Remove Old Backpack Extension (if installed)

   • Find the existing Backpack extension
   • Click "Remove"
   • Confirm removal

4. Load Unpacked Extension

   • Click "Load unpacked" button
   • Navigate to ~/Desktop/backpack-extension
   • Click "Select"

5. Verify Version

   • The extension should show version 0.10.37
   • You should see the Backpack logo

6. Pin Extension (Optional)

   • Click the puzzle icon in Chrome toolbar
   • Find "Backpack"
   • Click the pin icon to keep it visible

2. Set Up Wallet

1. Import Your Wallet

   • Click the Backpack extension icon
   • Select "Import wallet"
   • Enter your seed phrase
   • Create a password

2. Enable X1 Blockchain

   • Click the hamburger menu (☰)
   • Go to "Settings"
   • Select "Blockchains"
   • Toggle ON "X1"
   • Click "Save"

3. Verify X1 Wallet

   • In the main view, click the blockchain selector (top of screen)
   • Select "X1"
   • Verify your X1 address is shown
   • Confirm your XNT balance is displayed

Testing Scenarios

Test 1: View Console Logs (Setup)

Before testing transactions, set up console logging to monitor blockchain parameters:

1. Open Extension Console

   • Right-click the Backpack extension icon
   • Select "Inspect popup" or "Inspect"
   • Click on the "Console" tab

2. Open Service Worker Console

   • Go to chrome://extensions
   • Find Backpack extension
   • Click "service worker" link (under "Inspect views")
   • A new DevTools window opens - this is where logs will appear

Keep this console window open during all tests!

Test 2: Send XNT Transaction (PRIMARY TEST)

This is the main test that reproduces the original bug.

Steps:

1. Prepare Test

   • Make sure you're on X1 blockchain
   • Have at least 0.01 XNT for test + gas
   • Have a recipient address ready

2. Initiate Send

   • Click "Send" button
   • Select XNT token
   • Enter recipient address
   • Enter amount (e.g., 0.001 XNT)
   • Click "Review"

3. Check Console Logs

   • Switch to the Service Worker console
   • Look for: [SECURE_SVM_SIGN_TX] blockchain: x1
   • Expected: Should see "x1" (not "solana")

4. Confirm Transaction

   • Review transaction details
   • Click "Send"
   • Enter password if prompted

5. Verify Success

   • ✅ SUCCESS: Transaction should complete without errors
   • ✅ SUCCESS: No "no keyring for solana" error
   • ✅ SUCCESS: Transaction hash displayed
   • ✅ SUCCESS: Balance updates after confirmation

Expected Console Output:

[SECURE_SVM_SIGN_TX] blockchain: x1

❌ FAILURE Indicators:

• Error: "no keyring for solana"
• Console shows: [SECURE_SVM_SIGN_TX] blockchain: solana
• Transaction fails to sign

Test 3: Sign Message on X1

Tests the signMessage handler fix.

Prerequisites:

• A dApp that supports Solana/X1 message signing
• Or use developer console to trigger message signing

Steps:

1. Trigger Message Signing

   • Connect to a dApp on X1
   • Request message signature
   • Or run in console:

   window.backpack.signMessage(new TextEncoder().encode("Test message"), "base58");

2. Check Console

   • Look for: [SECURE_SVM_SIGN_MESSAGE] blockchain: x1

3. Sign Message

   • Review message
   • Click "Sign"

4. Verify Success

   • ✅ Message signed successfully
   • ✅ Signature returned
   • ✅ No keyring errors

Test 4: Sign Multiple Transactions

Tests the signAllTransactions handler fix.

Prerequisites:

• A dApp that batches multiple transactions
• Or create multiple transactions programmatically

Steps:

1. Trigger Batch Signing

   • Use a dApp that sends multiple transactions
   • Or programmatically create batch

2. Check Console

   • Look for: [SECURE_SVM_SIGN_ALL_TX] blockchain: x1

3. Sign All Transactions

   • Review transactions
   • Click "Sign All"

4. Verify Success

   • ✅ All transactions signed
   • ✅ No keyring errors

Test 5: Solana Compatibility Check

Ensures the fix doesn't break existing Solana functionality.

Steps:

1. Switch to Solana

   • Click blockchain selector
   • Select "Solana"

2. Send SOL Transaction

   • Click "Send"
   • Select SOL token
   • Enter recipient and amount
   • Click "Review"

3. Check Console

   • Look for: [SECURE_SVM_SIGN_TX] blockchain: solana
   • Expected: Should see "solana" (the fallback)

4. Complete Transaction

   • Click "Send"
   • Verify success

5. Verify Success

   • ✅ Transaction completes normally
   • ✅ Solana transactions still work
   • ✅ No regression

Console Log Reference

What to Look For

The fix adds console logging to three handlers:

Handler	Log Pattern	When It Appears
handleSign	[SECURE_SVM_SIGN_TX] blockchain: <value>	When signing a transaction
handleSignMessage	[SECURE_SVM_SIGN_MESSAGE] blockchain: <value>	When signing a message
handleSignAll	[SECURE_SVM_SIGN_ALL_TX] blockchain: <value>	When signing multiple transactions

Expected Values

Blockchain	Expected Log Value
X1	blockchain: x1
Solana	blockchain: solana

Example Console Output

✅ CORRECT (X1 Transaction):

[SECURE_SVM_SIGN_TX] blockchain: x1

❌ INCORRECT (Bug Still Present):

[SECURE_SVM_SIGN_TX] blockchain: solana

✅ CORRECT (Solana Transaction):

[SECURE_SVM_SIGN_TX] blockchain: solana

Troubleshooting

Problem: No Console Logs Appearing

Solution:

1. Make sure you're looking at the Service Worker console, not the Popup console
2. Go to chrome://extensions → Backpack → click "service worker"
3. The console logs appear in the Service Worker DevTools

Problem: Still Getting "no keyring for solana" Error

Possible Causes:

1. Wrong version loaded: Verify version is 0.10.37
2. Cache issue: Try:
   • Remove extension completely
   • Close all Chrome windows
   • Reopen Chrome
   • Load extension again
3. Build issue: Verify build completed successfully
4. Console shows wrong blockchain: If logs show "solana" instead of "x1", the fix didn't apply

Debug Steps:

1. Check console log - what blockchain value is shown?
2. Verify you're on X1 blockchain in the UI
3. Check manifest.json version in extension folder
4. Try hard reload: Ctrl+Shift+R (Windows) or Cmd+Shift+R (Mac)

Problem: Extension Won't Load

Solution:

1. Check manifest.json exists in ~/Desktop/backpack-extension
2. Verify all files copied correctly
3. Check browser console for load errors
4. Try using absolute path when loading

Problem: Transaction Fails for Other Reasons

Not related to keyring fix if:

• Error is about insufficient balance
• Error is about network issues
• Error is about invalid recipient address

Related to keyring fix if:

• Error mentions "no keyring"
• Error mentions "solana" when using X1
• Console shows wrong blockchain value

Success Criteria

The fix is working correctly if ALL of the following are true:

• ✅ Extension loads successfully (version 0.10.37)
• ✅ X1 blockchain appears in blockchain selector
• ✅ XNT balance displays correctly
• ✅ Console log shows blockchain: x1 when sending XNT
• ✅ Transaction signs WITHOUT "no keyring for solana" error
• ✅ Transaction completes successfully
• ✅ Transaction hash is displayed
• ✅ Balance updates after transaction
• ✅ Solana transactions still work (no regression)

Test Results Template

Copy this template to document your test results:

## Test Results - X1 Keyring Fix v0.10.37

**Date:** [DATE]
**Tester:** [NAME]
**Browser:** [Chrome/Brave/Edge + version]

### Test 1: View Console Logs
- [ ] Service Worker console opened
- [ ] Console logs visible

### Test 2: Send XNT Transaction
- [ ] Transaction initiated
- [ ] Console shows: `[SECURE_SVM_SIGN_TX] blockchain: x1`
- [ ] No "no keyring for solana" error
- [ ] Transaction signed successfully
- [ ] Transaction confirmed on blockchain
- [ ] Balance updated

**Transaction Hash:** [HASH]

### Test 3: Sign Message
- [ ] Message signing triggered
- [ ] Console shows: `[SECURE_SVM_SIGN_MESSAGE] blockchain: x1`
- [ ] Message signed successfully

### Test 4: Solana Compatibility
- [ ] Switched to Solana blockchain
- [ ] SOL transaction initiated
- [ ] Console shows: `[SECURE_SVM_SIGN_TX] blockchain: solana`
- [ ] Transaction completed successfully

### Issues Encountered
[Describe any issues]

### Overall Result
- [ ] PASS - All tests successful
- [ ] FAIL - Issues found (describe above)

Next Steps After Testing

If Tests Pass

1. Document successful test results
2. Remove console.log statements (optional for production)
3. Consider deploying to production
4. Monitor for any user reports

If Tests Fail

1. Document exact error messages
2. Capture console output
3. Check which test failed
4. Review the relevant handler code
5. Report findings with:
   • Test that failed
   • Console output
   • Error message
   • Steps to reproduce

Additional Notes

• Console logs are for debugging only and can be removed in production
• The ?? Blockchain.SOLANA fallback ensures backwards compatibility
• All three handlers (sign, signMessage, signAll) were updated for completeness
• X1 uses the same signing mechanism as Solana (SVM-compatible)

Support

If you encounter issues:

1. Check the console logs first
2. Verify version 0.10.37 is loaded
3. Review troubleshooting section above
4. Check X1_KEYRING_FIX_SUMMARY.md for technical details

---

Version: 0.10.37 Build Location: ~/Desktop/backpack-extension Documentation: X1_KEYRING_FIX_SUMMARY.md