Energy consumption limit for switches as loadpoint

[FunnyPalatine]

Description

The use of Shelly Plug S as loadpoint works fine in principle. However, the lowest energy consumption limit one can set in the UI is 5 kWh. But I want to switch a pump with 450W only. This means the minimum runtime would be more than 11 hours. This by far too long for my use case.
Could it be possible to have lower limits, e.g. values like 0.5 kWh, 1 kWh?

Steps to Reproduce

1. Set a switch as loadpoint.
2. Try to set load limits lower than 5 kWh.

Version

v0.314.2

System

linux/arm64, CEST +02:00