goodix not work

[PrabaKaran123]

<6>[ 1.026384,1] goodix-ts 5-0014: GTP Driver Version: V2.8.0.2<2017/12/14>
<6>[ 1.026390,1] goodix-ts 5-0014: GTP I2C Address: 0x14
<6>[ 1.026396,1] goodix-ts 5-0014: Unset touchscreen-max-id, use default
<6>[ 1.026402,1] goodix-ts 5-0014: Unset touchscreen-size-x, use default
<6>[ 1.026407,1] goodix-ts 5-0014: Unset touchscreen-size-y, use default
<6>[ 1.026412,1] goodix-ts 5-0014: Unset touchscreen-max-w, use default
<6>[ 1.026417,1] goodix-ts 5-0014: Unset touchscreen-max-p, use default
<6>[ 1.026423,1] goodix-ts 5-0014: touch input parameters is [id x y w p]<16 720 1080 1024 1024>
<6>[ 1.026428,1] goodix-ts 5-0014: Failed get int-trigger-type from dts,set default
<3>[ 1.026443,1] goodix-ts 5-0014: No valid irq gpio
<6>[ 1.026490,1] goodix-ts 5-0014: Regulator get failed vdd ret=0
<6>[ 1.026499,1] goodix-ts 5-0014: Regulator get failed vcc_i2c ret=0
<6>[ 1.026585,1] goodix-ts 5-0014: Failed get pinctrl state:default state
<6>[ 1.026603,1] goodix-ts 5-0014: Success request rst-gpio
<6>[ 1.026608,1] goodix-ts 5-0014: Guitar reset
goodix-ts 5-0014: I2c read failed,dev:14,reg:8047,size:1
<3>[ 4.208367,0] goodix-ts 5-0014: GTP i2c test failed time 1
<3>[ 7.368468,0] goodix-ts 5-0014: I2c read failed,dev:14,reg:8047,size:1
<3>[ 7.368476,0] goodix-ts 5-0014: GTP i2c test failed time 2
10.528468,0] goodix-ts 5-0014: I2c read failed,dev:14,reg:8047,size:1
<3>[ 10.528477,0] goodix-ts 5-0014: GTP i2c test failed time 3
<3>[ 10.539510,0] goodix-ts 5-0014: Failed communicate with IC use I2C
<4>[ 10.539537,0] goodix-ts: probe of 5-0014 failed with error -11

you need to create dts.
and use valid i2c address; sensor parameters : size-x, size-y; set cfg-group; if needed vdd_ana-supply and vcc_i2c-supply; pinctrl; reset-gpios, irq-gpios and etc.
for example zb500kl working dts : https://github.com/LWJGLRobot/ZB500KL_X00AD_KERNEL/blob/cyanogen_msm8916_cm-14.1/arch/arm/boot/dts/qcom/msm8916-qrd-skuh.dtsi

this is a begin of zb500kl gt9xx dts:
i2c@78b9000 { /* BLSP1 QUP5 */
gt9xx-i2c@5d {
compatible = "goodix,gt9xx";
reg = <0x5d>;
status = "okay";
interrupt-parent = <&msm_gpio>;
interrupts = <13 0x2008>;

[PrabaKaran123]

thanks for your replay how to configure my are
goodix@14 {
compatible = "goodix,gt970";
reg = <0x14>;
pinctrl-names = "gt9xx_int_default", "gt9xx_int_suspend";
pinctrl-0 = <0xc7>;
pinctrl-1 = <0xc8>;
interrupt-parent = <0x77>;
interrupts = <0xd 0x0>;
reset-gpios = <0x77 0xc 0x0>;
interrupt-gpios = <0x77 0xd 0x0>;
goodix,vdd-gpio = <0xab 0x3 0x0>;
goodix,panel-coords = <0x0 0x0 0x2d0 0x500>;
goodix,display-coords = <0x0 0x0 0x2d0 0x500>;
goodix,button-map = <0x9e 0x66 0x8b>;
goodix,family-id = <0x0>;
goodix,i2c-pull-up;
goodix,cfg-data0 = [4b d0 02 5f 05 0a 34 d0 01 08 3c 0f 50 32 30 35 00 00 37 13 10 01 00 14 14 26 14 8c 2c 0d 30 32 9d 09 9d 09 00 ba 33 11 00 00 00 00 00 00 00 08 0a a0 22 19 5a 54 d0 03 bc 1e 06 04 c9 1c 00 9e 25 23 82 2f 00 6a 3d 00 59 4f 00 59 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f7 01 00 00 00 00 00 00 00 00 00 0f 50 00 00 00 00 1e 02 0c 04 0a 06 08 14 12 16 10 18 0e 1a ff 00 98 fb 28 ac 1e 1e 14 08 1e 83 00 dc 00 40 41 00 02 04 06 08 0a 0c 0f 10 12 13 14 16 18 1c 1d 1e 1f 20 21 22 24 26 28 ff ff 00 00 00 00 30 57 42 00 00 00 00 00 00 00 00 c5 24 01];
goodix,cfg-data2 = [41 d0 02 5f 05 0a 34 00 01 08 32 08 50 3c 33 35 00 00 37 13 00 00 00 14 14 26 14 8c 2c 0d 3c 3e 9a 07 d3 07 00 99 33 11 00 00 00 00 00 00 00 00 00 00 21 1e 64 94 40 02 bc 1e 00 04 d0 22 00 a9 2b 1e 89 37 00 71 46 00 5e 59 00 5e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00 00 00 00 00 00 00 00 0f 50 00 00 00 00 1e 02 0c 04 0a 06 08 14 12 16 10 18 0e 1a ff 00 00 00 00 00 00 00 00 00 00 00 00 04 00 50 00 00 02 04 06 08 0a 0c 0f 10 12 13 14 16 18 1c 1d 1e 1f 20 21 22 24 26 28 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8b 01];
goodix,cfg-data3 = [43 d0 02 5f 05 0a 34 d0 01 08 3c 08 50 32 30 35 00 00 37 13 10 01 00 14 14 26 14 8c 2c 0d 30 32 9d 09 9d 09 00 ba 33 11 00 00 00 00 00 00 00 08 0a a0 22 19 5a 54 d0 03 bc 1e 06 04 c9 1c 00 9e 25 23 82 2f 00 6a 3d 00 59 4f 00 59 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f7 01 00 00 00 00 00 00 00 00 00 0f 50 00 00 00 00 1e 02 0c 04 0a 06 08 14 12 16 10 18 0e 1a ff 00 98 fb 1e ac 1e 19 14 08 1e 87 00 dc 00 40 41 00 02 04 06 08 0a 0c 0f 10 12 13 14 16 18 1c 1d 1e 1f 20 21 22 24 26 28 ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 c7 01];
ts-suspend-resume = <0x0>;
ts-fixed-key-type = <0x1>;
ts-virt-key = "0x01:139:117:1365:130:100:0x01:251:228:1365:90:100:0x01:172:360:1365:140:100:0x01:251:491:1365:90:100:0x01:158:603:1365:130:100";
};
};

i think something like this
gt9xx-i2c@14{
compatible = "goodix,gt9xx";
reg = <0x14>;
status = "okay";
interrupt-parent = <0x77>;
interrupts = <0xd 0x0>;
// there i dont know, i use this pinctrl
pinctrl-names = "default", "int-output-low", "int-output-high", "int-input";
pinctrl-0 = <>;
pinctrl-1 = <>;
pinctrl-2 = <>;
pinctrl-3 = <>;
//end pinctrl
reset-gpios = <0x77 0xc 0x0>;
//maybe irq-gpios
interrupt-gpios = <0x77 0xd 0x0>;
...

i dont know

in the gt9xx.c there are only this things:
reset-gpios
irq-gpios
touchscreen-key-map
goodix,pen-suppress-finger
goodix,power-off-sleep
goodix,resume-in-workqueue
goodix,type-a-report
goodix,esd-protect
goodix,auto-update-cfg
goodix,auto-update
goodix,slide-wakeup
goodix,swap-x2y
goodix,driver-send-cfg
goodix,int-sync
irq-flags
touchscreen-max-id
touchscreen-size-x
touchscreen-size-y
touchscreen-max-w
touchscreen-max-p
goodix,cfg-groupX (goodix,cfg-group1, goodix,cfg-group2, ...)