Adding qos policies to routed interface templates (#751)

* Adding qos policies to routed interface templates

* Fixing routed ports qos defaults

Author: juarocha

roles/dtc/common/templates/ndfc_interfaces/ndfc_interface_po_routed.j2

@@ -31,6 +31,11 @@
     speed: {{ interface['speed'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_po_interface.speed) }}
     pc_mode: "{{ interface['pc_mode'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_po_interface.pc_mode) }}"
     members: {{ interface['members'] | default(omit) }}
+    enable_qos: {{ interface['enable_qos'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_po_interface.enable_qos) | lower }}
+{% if interface['enable_qos'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_po_interface.enable_qos) %}
+    qos_policy: {{ interface['qos_policy'] | default("") }}
+    queuing_policy: {{ interface['queuing_policy'] | default("") }}
+{% endif %}
     cmds: |2-
       {{ interface['freeform_config'] | default('') | indent(6, false) }}
 {% endif %}

roles/dtc/common/templates/ndfc_interfaces/ndfc_interface_routed.j2

@@ -34,6 +34,11 @@
     int_vrf: {{ interface['vrf'] | default(omit) }}
     mtu: {{ interface['mtu'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_interface.mtu) }}
     speed: {{ interface['speed'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_interface.speed) }}
+    enable_qos: {{ interface['enable_qos'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_interface.enable_qos) | lower }}
+{% if interface['enable_qos'] | default(defaults.vxlan.topology.switches.interfaces.topology_switch_routed_interface.enable_qos) %}
+    qos_policy: {{ interface['qos_policy'] | default("") }}
+    queuing_policy: {{ interface['queuing_policy'] | default("") }}
+{% endif %}
     cmds: |2-
       {{ interface['freeform_config'] | default('') | indent(6, false) }}
 {% endif %}

roles/validate/files/defaults.yml

@@ -200,8 +200,8 @@ factory_defaults:
             enable_lacp_vpc_convergence: false
             lacp_port_priority: 32768
             lacp_rate: normal
-            monitor: false
             enable_qos: false
+            monitor: false
           topology_switch_trunk_po_interface:
             description: "NetAsCode Trunk PO Interface"
             mtu: jumbo
@@ -218,8 +218,8 @@ factory_defaults:
             enable_lacp_vpc_convergence: false
             lacp_port_priority: 32768
             lacp_rate: normal
-            monitor: false
             enable_qos: false
+            monitor: false
           topology_switch_dot1q_interface:
             description: "NetAsCode Dot1q Interface"
             mtu: jumbo
@@ -235,6 +235,7 @@ factory_defaults:
             mtu: 9216
             speed: auto
             enabled: true
+            enable_qos: false
           topology_switch_routed_sub_interface:
             description: "NetAsCode Routed Sub Interface"
             mtu: 9216
@@ -246,6 +247,7 @@ factory_defaults:
             speed: auto
             enabled: true
             pc_mode: active
+            enable_qos: false
           topology_switch_loopback_interface:
             description: "NetAsCode Loopback Interface"
             enabled: true