With new firmware 2.x it seems partly to work

[caldir65]

I've a couple of GS30x-Switches, and every switch was delivered with a new firmware 2.0.x. With firmware ntgrrc seems not able to work with.
A start with ```
./ntgrrc-v0.12.1-linux-amd64 login --address=192.xxx.xxx.xxx and -p=<password>`` returns ``Error: login request returned 200 OK, but response did not contain a session token ('SID' cookie). this is known behaviour from the switch. please, wait some minutes and tray again later
`

[caldir65]

If I use
./ntgrrc-v0.12.1-linux-amd64 login --address=192.168.1.13

it ask for my password, and then I use the tool.
partly tested with a GS308EP and fw 2.0.0.11

Fine would be switching the LEDs on or off