[shelly] Plus RGBW PM issues in RGB Mode

[herwig-coder]

Expected Behavior

• The shelly Plus RGBW PM can be configured in three different Device Profiles "Lights x 4", "RGB, "RGBW". Issue#18001 addresses already the "Lights x 4" issue, but also RGB would be great if supported.

• The Plus RGBW PM also has a power metering for which it would be great to have a channel.

• Turning off the Light with the default UI button (when following default config through UI) should work as it works in the shelly Web interface

Current Behavior

When I configure the device in the Shelly Webinterface in "Settings->Device Profile" as "RGB" instead of "RGBW" the thing goes from Online to the API Error and then to Websocket Error. I tried autodiscovery as well as manual selection of the device - the behavior is the same.

There is no channel available for the power consumption

Possible Solution

Steps to Reproduce (for Bugs)

1. Setup the shelly in the network
2. Change configuration to "RGB"
3. Use autodiscovery to add the thing

Context

I tried to connect a motion Shelly Blu motion detector to the Shelly RGB - until I noticed that there is no gateway funtion. Thank you all for the great work - I love the community and the work you are doing. Apologies if I did not follow some policies.

Your Environment

• Version used: - Openhab 5.0.1; Shelly Firmware version 1.7.0
• Operating System and version (desktop or mobile, Windows 10, Raspbian Buster, ...): Debian 12

[markus7017]

I'm working on Plus/Pro RGBW support, check PR #19227, but it will take some time.

[markus7017]

@herwig-coder I splittet this issue and created #19252 for the BLU Gateway support, this is an easy one
The rest will be addressed in PR #19227

[markus7017]

Support for BLU Gateway has been separated: #19227

Please try the DEV build from today

[herwig-coder]

Hi Markus,
thank you for the quick response and the new version. I have installed the dev binding on top of the current snapshot release, but now I cannot add any parameters when manually adding the thing. Autodiscovery did not find the thing and since I cannot add the IP, I could not check anything further.

[herwig-coder]

Hi Markus, I did another update yesterday with the latest dev build and with everything on my machine updated to the latest versions. Now the BLU Gateway works for me. Thanks a lot for the fix!

[markus7017]

Addressed in PR #19227.