OLED Display Issues w/Alignment and Space-Usage

[benjammin2068]

Hey all,

I recently picked up a couple WisMesh Pocket V2 units and a RAK19007/RAK4631 pcb to start playing with Meshtastic to see what it does.
Not sure if this post is in the right place - so let me know and I'll move it.

The WisMesh Pocket V2 units originally came with version 2.5 firmware - I updated to the latest stable 2.6.11.

From there I started using and noticed some of the OLED screens have scrollover to the next line.
For example - the page with the battery voltage showing uptime and UTC Time, channel utilization.

The uptime m/h the m on the very right side of the display has 2 last pixels on the x-axis plotting on the two left pixel rows (maybe x0, x1) of what might be the next line of the display.

Although it seems like lines are spaced 4 pixels apart when they could be 2 pixels apart as some screens with text are written over the dots at the bottom indicating pages to display and current display page. (maybe it's just the font though and there's an extra line when it was forgotten the OLED only has so many lines of space)

I also tried the most recent alpha version to see if the problem was fixed -- and it appears to not be the case.

Is anyone else seeing this issue? Attached are a couple images of the problem.

Cheers,

-Ben

[iannucci]

Yes, I am seeing the same issue on my WisMesh Pocket v2 — purchased in the last month and flashed (by me) to 2.7.15.

[sphxdr]

I have the WisMesh Pocket V2 as well and also with 2.7.15. I used to have this issue as well but it has been fixed by manually adjusting the Display settings to SSD 1306 instead of Auto. As seen on https://store.rokland.com/en-de/pages/oled-character-overlap-fix-rak-wireless-wismesh-pocket