Add protocol for 'conecto' devices

[mwittig]

https://forum.pimatic.org/topic/4718/rf-protocol-for-conecto-devices

[mwittig]

conecto IP44 Funksteckdosen

Here is the debug log from pimatic:

Channel A - Command 'ON':
17:37:34.123 [pimatic-homeduino] debug: data: "RF receive 316 844 10356 0 0 0 0 0 01010101101010011001010101011010010101011010101010010101011001010102"
17:37:34.126 [pimatic-homeduino] debug: received: [ 316, 844, 10356 ] 01010101101010011001010101011010010101011010101010010101011001010102

Channel A - Command 'OFF':
17:37:47.280 [pimatic-homeduino] debug: data: "RF receive 316 844 10360 0 0 0 0 0 01010101101010011001010101011010010101011010100110010101011001100102"
17:37:47.283 [pimatic-homeduino] debug: received: [ 316, 844, 10360 ] 01010101101010011001010101011010010101011010100110010101011001100102

Channel B - Command 'ON':
17:30:00.412 [pimatic-homeduino] debug: data: "RF receive 316 844 10360 0 0 0 0 0 01010101101010011001010101011010010101011010011010010101011010100102"
17:30:00.415 [pimatic-homeduino] debug: received: [ 316, 844, 10360 ] 01010101101010011001010101011010010101011010011010010101011010100102

Channel B - Command 'OFF':
17:30:37.951 [pimatic-homeduino] debug: data: "RF receive 316 844 10360 0 0 0 0 0 01010101101010011001010101011010010101011010010110010101011010010102"
17:30:37.954 [pimatic-homeduino] debug: received: [ 316, 844, 10360 ] 01010101101010011001010101011010010101011010010110010101011010010102

Cannel ALL - Command 'ON':
17:44:27.380 [pimatic-homeduino] debug: data: "RF receive 316 844 10360 0 0 0 0 0 01010101101010011001010101011010010101010110010110010101100110010102"
17:44:27.384 [pimatic-homeduino] debug: received: [ 316, 844, 10360 ] 01010101101010011001010101011010010101010110010110010101100110010102

Channel ALL - Command 'OFF':
17:44:35.725 [pimatic-homeduino] debug: data: "RF receive 316 844 10360 0 0 0 0 0 01010101101010011001010101011010010101011001010110010101010110010102"
17:44:35.729 [pimatic-homeduino] debug: received: [ 316, 844, 10360 ] 01010101101010011001010101011010010101011001010110010101010110010102

[mwittig]

@MrSponti @mrdago I finally got hold of a conecto remote which will help me to complete the protocol implementation. The test data you provided turned out to contain errors as some sample got mixed up. I was also missing the data for channel C and D. Implementation is in progress but it may take two more weeks to complete the work as I am buy the next days.

[mwittig]

New test data

        #'10011001100101010101100101101001010101011010101010010110011010010102' # Channel A - Command 'ON'
        #'10011001100101010101100101101001010101011010100110010110011010100102' # Channel A - Command 'OFF'
        #'10011001100101010101100101101001010101011010011010010110011001010102' # Channel B - Command 'ON'
        #'10011001100101010101100101101001010101011010010110010110011001100102' # Channel B - Command 'OFF'
        #'10011001100101010101100101101001010101011001101010010110010110010102' # Channel C - Command 'ON'
        #'10011001100101010101100101101001010101011001100110010110010110100102' # Channel C - Command 'OFF'
        #'10011001100101010101100101101001010101010110101010010110100110010102' # Channel D - Command 'ON'
        #'10011001100101010101100101101001010101010110100110010110100110100102' # Channel D - Command 'OFF'
        #'10011001100101010101100101101001010101010110010110010110100101100102' # ALL - Command 'ON'
        #'10011001100101010101100101101001010101011001010110010110010101100102' # ALL - Command 'OFF'