|
| 1 | +# task342 NemTron SSH/runtime access recovery report |
| 2 | + |
| 3 | +<!-- METADATA:STATUS=ReadyForPR,DISPOSITION=BLOCK_NEMTRON_ACCESS,SESSION=91 --> |
| 4 | + |
| 5 | +Generated: 2026-06-04T12:45:10Z |
| 6 | + |
| 7 | +## Decision |
| 8 | + |
| 9 | +`BLOCK_NEMTRON_ACCESS`. |
| 10 | + |
| 11 | +The current `NemTron` SSH alias still cannot reach the target runtime host. |
| 12 | +The proxy hop is reachable and authenticates, but the configured target |
| 13 | +`10.100.2.62:33808` refuses TCP connections from that proxy. This appears to be |
| 14 | +a target host/port or LTP target service issue, not a local SSH alias, local |
| 15 | +auth, DNS, or proxy-hop auth failure. |
| 16 | + |
| 17 | +Because the `NemTron` route is blocked, I could not verify `/root` access, |
| 18 | +task337 runtime target readability, task298 checkpoint candidate readability, |
| 19 | +task339 train-only root readability, or remote runtime imports. task341 should |
| 20 | +not be rerun until the target service/port is restored or a replacement |
| 21 | +lead-approved route is provided. |
| 22 | + |
| 23 | +## Scope And Artifacts |
| 24 | + |
| 25 | +- Branch: |
| 26 | + `intern_nemotron_worker_4/task342_qwen_all_sft_nemtron_ssh_runtime_access_recovery_s1` |
| 27 | +- Base: `origin/main` |
| 28 | + `371aea491776cc258e1cbb59a081d28be0530438` |
| 29 | +- Lead docs: |
| 30 | + `origin/intern_nemotron_lead/session1-recovery-task-docs` |
| 31 | + `c7a417d11cde7935be6f7abdc463426504dfbd33` |
| 32 | +- Local artifact root: |
| 33 | + `/work-agents/intern_nemotron_worker_4/outputs/task342_qwen_all_sft_nemtron_ssh_runtime_access_recovery_s1/run_20260604T124233Z` |
| 34 | +- Artifact checksum manifest: |
| 35 | + `/work-agents/intern_nemotron_worker_4/outputs/task342_qwen_all_sft_nemtron_ssh_runtime_access_recovery_s1/run_20260604T124233Z/manifests/artifact_checksums.sha256` |
| 36 | + |
| 37 | +## Commands And Results |
| 38 | + |
| 39 | +Commands were run from |
| 40 | +`/work-agents/intern_nemotron_worker_4/Nemotron_task342` unless noted. |
| 41 | + |
| 42 | +### Non-secret SSH route inspection |
| 43 | + |
| 44 | +```bash |
| 45 | +ssh -G NemTron |
| 46 | +``` |
| 47 | + |
| 48 | +Captured raw output and stderr: |
| 49 | + |
| 50 | +- `logs/ssh_g_raw.log` |
| 51 | +- `logs/ssh_g_stderr.log` |
| 52 | +- `logs/ssh_g.rc` |
| 53 | + |
| 54 | +Sanitized/non-secret route summary: |
| 55 | + |
| 56 | +```text |
| 57 | +host NemTron |
| 58 | +user root |
| 59 | +hostname 10.100.2.62 |
| 60 | +port 33808 |
| 61 | +identityfile /root/.ssh/id_ed25519 |
| 62 | +proxycommand ssh -i /root/.ssh/ltp_ssh_key -p 30222 -W %h:%p sshuser@10.100.197.19 |
| 63 | +``` |
| 64 | + |
| 65 | +`ssh -G` returned rc `0`. It printed only the standard no-tty message on |
| 66 | +stderr. |
| 67 | + |
| 68 | +### Required NemTron connectivity probe |
| 69 | + |
| 70 | +```bash |
| 71 | +ssh -o ConnectTimeout=10 NemTron 'hostname; date -u +%Y-%m-%dT%H:%M:%SZ' |
| 72 | +``` |
| 73 | + |
| 74 | +Artifacts: |
| 75 | + |
| 76 | +- `logs/ssh_connectivity_probe.stdout` |
| 77 | +- `logs/ssh_connectivity_probe.stderr` |
| 78 | +- `logs/ssh_connectivity_probe.rc` |
| 79 | +- `manifests/ssh_connectivity_probe_summary.txt` |
| 80 | + |
| 81 | +Result: |
| 82 | + |
| 83 | +- rc: `255` |
| 84 | +- stdout: empty |
| 85 | +- stderr: |
| 86 | + |
| 87 | +```text |
| 88 | +channel 0: open failed: connect failed: Connection refused |
| 89 | +stdio forwarding failed |
| 90 | +Connection closed by UNKNOWN port 65535 |
| 91 | +``` |
| 92 | + |
| 93 | +### Proxy-hop classification probe |
| 94 | + |
| 95 | +The `ProxyCommand` target was inspected without exposing key material or |
| 96 | +changing SSH config. First probe confirmed the proxy hop is reachable but |
| 97 | +`python3` is not available on the proxy host: |
| 98 | + |
| 99 | +```bash |
| 100 | +ssh -i /root/.ssh/ltp_ssh_key -p 30222 -o BatchMode=yes -o ConnectTimeout=10 sshuser@10.100.197.19 '<hostname/date/python tcp probe>' |
| 101 | +``` |
| 102 | + |
| 103 | +Artifacts: |
| 104 | + |
| 105 | +- `logs/proxy_target_port_probe.stdout` |
| 106 | +- `logs/proxy_target_port_probe.stderr` |
| 107 | +- `logs/proxy_target_port_probe.rc` |
| 108 | + |
| 109 | +Result: |
| 110 | + |
| 111 | +- rc: `127` |
| 112 | +- stdout included proxy hostname |
| 113 | + `ssh-proxy-deployment-64fbf5f7d5-4flbz` and timestamp |
| 114 | + `2026-06-04T12:43:37Z`. |
| 115 | +- stderr: `bash: line 1: python3: command not found`. |
| 116 | + |
| 117 | +Second probe used Bash `/dev/tcp` from the proxy hop to the configured target: |
| 118 | + |
| 119 | +```bash |
| 120 | +ssh -i /root/.ssh/ltp_ssh_key -p 30222 -o BatchMode=yes -o ConnectTimeout=10 sshuser@10.100.197.19 \ |
| 121 | + 'hostname; date -u +%Y-%m-%dT%H:%M:%SZ; timeout 5 bash -lc "</dev/tcp/10.100.2.62/33808" ...' |
| 122 | +``` |
| 123 | + |
| 124 | +Artifacts: |
| 125 | + |
| 126 | +- `logs/proxy_target_port_probe_bash_tcp.stdout` |
| 127 | +- `logs/proxy_target_port_probe_bash_tcp.stderr` |
| 128 | +- `logs/proxy_target_port_probe_bash_tcp.rc` |
| 129 | +- `manifests/proxy_target_port_probe_bash_tcp_summary.txt` |
| 130 | + |
| 131 | +Result: |
| 132 | + |
| 133 | +- rc: `1` |
| 134 | +- stdout: |
| 135 | + |
| 136 | +```text |
| 137 | +ssh-proxy-deployment-64fbf5f7d5-4flbz |
| 138 | +2026-06-04T12:44:07Z |
| 139 | +TCP_CONNECT 10.100.2.62:33808 FAIL rc=1 |
| 140 | +``` |
| 141 | + |
| 142 | +- stderr: |
| 143 | + |
| 144 | +```text |
| 145 | +bash: connect: Connection refused |
| 146 | +bash: line 1: /dev/tcp/10.100.2.62/33808: Connection refused |
| 147 | +``` |
| 148 | + |
| 149 | +This confirms the proxy hop authenticates and runs commands, while the target |
| 150 | +host/port behind the proxy refuses the TCP connection. |
| 151 | + |
| 152 | +## Blocker Classification |
| 153 | + |
| 154 | +- Local SSH alias/config parse: `PASS`. |
| 155 | +- Local private key material inspection: not performed. |
| 156 | +- Proxy-hop auth/connectivity: `PASS`. |
| 157 | +- Target host/port from proxy hop: `BLOCK`, connection refused. |
| 158 | +- Required `ssh NemTron` command: `BLOCK`, rc `255`. |
| 159 | +- `/root` access: not testable because SSH route does not reach target. |
| 160 | +- task337 runtime target: not testable because SSH route does not reach target. |
| 161 | +- task298 checkpoint candidate: not testable because SSH route does not reach |
| 162 | + target. |
| 163 | +- task339 train-only root: not testable because SSH route does not reach |
| 164 | + target. |
| 165 | +- Runtime imports: not testable because SSH route does not reach target. |
| 166 | + |
| 167 | +Likely required owner/action: coordinator or infrastructure owner needs to |
| 168 | +restore or replace the LTP/NemTron target service behind |
| 169 | +`10.100.2.62:33808`, or provide a new lead-approved host/port/alias. This |
| 170 | +worker should not mutate SSH config, LTP job state, shared runtime roots, or |
| 171 | +network/system state to remediate it. |
| 172 | + |
| 173 | +## Artifact Checksum Verdict |
| 174 | + |
| 175 | +From the artifact root: |
| 176 | + |
| 177 | +```bash |
| 178 | +sha256sum -c manifests/artifact_checksums.sha256 |
| 179 | +``` |
| 180 | + |
| 181 | +Result: `PASS`, 16 entries. |
| 182 | + |
| 183 | +Important hashes: |
| 184 | + |
| 185 | +- `logs/ssh_connectivity_probe.stderr`: |
| 186 | + `7b8f4b70c99b5e871dd61cfe3c21ccd21a73ce243c8199a780f594c8086ecc90` |
| 187 | +- `logs/proxy_target_port_probe_bash_tcp.stdout`: |
| 188 | + `f38a3326621effc9570b110728b97f1e9bd9777ad45472d3ee0f08148f582b44` |
| 189 | +- `logs/proxy_target_port_probe_bash_tcp.stderr`: |
| 190 | + `e5aee70c3881f8772ec7c65f7f0c919ed711d3e18f438745d563d5adda813309` |
| 191 | +- `manifests/ssh_route_summary_nonsecret.txt`: |
| 192 | + `7729ef2c32268eae0db74aaa81769ccd13cc630cbfe187ac093f35391109e800` |
| 193 | +- `manifests/command_env_manifest.txt`: |
| 194 | + `b79c29e6a0b6d2a480a6fcb80b6f66f5f0018315114abb3e4dab0aa59636bd60` |
| 195 | + |
| 196 | +## Boundary Confirmation |
| 197 | + |
| 198 | +Confirmed from commands and artifacts: |
| 199 | + |
| 200 | +- No optimizer steps or training loop. |
| 201 | +- No benchmark eval, AIME eval, or task243 eval. |
| 202 | +- No export, endpoint, promotion, task310 release, task255 reuse, or AIME2025 |
| 203 | + train rows. |
| 204 | +- No shared deletion/mutation and no product/source code edits. |
| 205 | +- No destructive SSH config changes. |
| 206 | +- No main push, merge, or self-merge. |
0 commit comments