EP4CE22 Daisy Chain Programming Failure

[3TTurkey]

JTAG Daisy Chain Information：
jdsn@jdsn-VirtualBox:~/WorkSpace/openfpgaloader/build$ ./openFPGALoader --detect
empty
No cable or board specified: using direct ft2232 interface
Jtag frequency : requested 6.00MHz -> real 6.00MHz
index 0:
idcode 0x20f30dd
manufacturer altera
family cyclone III/IV/10 LP
model EP3C25/EP4CE22/10CL025
irlength 10
index 1:
idcode 0x20f30dd
manufacturer altera
family cyclone III/IV/10 LP
model EP3C25/EP4CE22/10CL025
irlength 10

Error Info:
jdsn@jdsn-VirtualBox:~/WorkSpace/openfpgaloader/build$ ./openFPGALoader --board de0nano --index-chain 0 --write-flash EP4CE22E22_flow_led_100ms_dc.rbf
empty
write to flash
Jtag frequency : requested 6.00MHz -> real 6.00MHz
use: /usr/local/share/openFPGALoader/spiOverJtag_ep4ce2217.rbf.gz
Load SRAM: [==================================================] 100.00%
Done
Detail:
Jedec ID : 20
memory type : 20
memory capacity : 13
flash chip unknown: use basic protection detection
start addr: 00000000, end_addr: 00040000
timeout: 0 0 0
0
wait: Error
write en: Error
Erasing: [==================================================] 100.00%
Fail
Error: Failed to program FPGA: Fail to write data

[trabucayre]

Yes.
It's a known issue. spiOverJtag for Altera must be reworked, with an approach similar to xilinx version, to be working when more than one FPGA is present in the chain.
This is possible but will took a bit of time to rewrite, test and perform validation on different devices