Add SM86_RTX3060_MOBILE tested config (975 MHz base clock, GA106)

configs/tested-cfgs/SM86_RTX3060_MOBILE/config_ampere_islip.icnt

@@ -0,0 +1,74 @@
+//21*1 fly with 32 flits per packet under gpgpusim injection mode
+use_map = 0;
+flit_size = 40; 
+
+// currently we do not use this, see subnets below
+network_count = 2;
+
+// Topology
+topology = fly;
+k = 78;
+n = 1;
+
+// Routing
+
+routing_function = dest_tag;
+
+
+// Flow control
+
+num_vcs     = 1;
+vc_buf_size = 256;
+input_buffer_size = 256;
+ejection_buffer_size = 256;
+boundary_buffer_size = 256;
+
+wait_for_tail_credit = 0;
+
+// Router architecture
+
+vc_allocator = islip; //separable_input_first;
+sw_allocator = islip; //separable_input_first;
+alloc_iters  = 1;
+
+credit_delay   = 0;
+routing_delay  = 0;
+vc_alloc_delay = 1;
+sw_alloc_delay = 1;
+
+input_speedup     = 1;
+output_speedup    = 1;
+internal_speedup  = 2.0;
+
+// Traffic, GPGPU-Sim does not use this
+
+traffic                = uniform;
+packet_size ={{1,2,3,4},{10,20}};
+packet_size_rate={{1,1,1,1},{2,1}};
+
+// Simulation - Don't change
+
+sim_type       = gpgpusim;
+//sim_type = latency;
+injection_rate = 0.1;
+
+subnets = 2;
+
+// Always use read and write no matter following line
+//use_read_write = 1;
+
+
+read_request_subnet = 0;
+read_reply_subnet = 1;
+write_request_subnet = 0;
+write_reply_subnet = 1;
+
+read_request_begin_vc = 0;
+read_request_end_vc = 0;
+write_request_begin_vc = 0;
+write_request_end_vc = 0;
+read_reply_begin_vc = 0;
+read_reply_end_vc = 0;
+write_reply_begin_vc = 0;
+write_reply_end_vc = 0;
+

configs/tested-cfgs/SM86_RTX3060_MOBILE/gpgpusim.config

@@ -0,0 +1,182 @@
+# functional simulator specification
+-gpgpu_ptx_instruction_classification 0
+-gpgpu_ptx_sim_mode 0
+-gpgpu_ptx_force_max_capability 86
+
+# Device Limits
+-gpgpu_stack_size_limit 1024
+-gpgpu_heap_size_limit 8388608
+-gpgpu_runtime_sync_depth_limit 2
+-gpgpu_runtime_pending_launch_count_limit 2048
+-gpgpu_kernel_launch_latency  5000
+-gpgpu_TB_launch_latency 0
+
+# Compute Capability
+-gpgpu_compute_capability_major 8
+-gpgpu_compute_capability_minor 6
+
+# PTX execution-driven
+-gpgpu_ptx_convert_to_ptxplus 0
+-gpgpu_ptx_save_converted_ptxplus 0
+
+# high level architecture configuration
+-gpgpu_n_clusters 30
+-gpgpu_n_cores_per_cluster 1
+-gpgpu_n_mem 12
+-gpgpu_n_sub_partition_per_mchannel 2
+
+# clock domains
+#-gpgpu_clock_domains <Core Clock>:<Interconnect Clock>:<L2 Clock>:<DRAM Clock>
+# Core clock = 975 MHz = the BASE clock the card ran at during ncu profiling
+# (ncu --clock-control=base default). Measured from HW: gpc__cycles_elapsed.avg /
+# gpu__time_duration = ~975 MHz. NOT the 1357 MHz boost (cudaDeviceProp::clockRate).
+# See tutorial/RTX3060_CORRELATION_RESULTS.md Run 1/Run 2. DRAM held at 3000.5 (GDDR6).
+-gpgpu_clock_domains 975:975:975:3000.5
+
+# shader core pipeline config
+-gpgpu_shader_registers 65536
+-gpgpu_registers_per_block 65536
+-gpgpu_occupancy_sm_number 86
+
+-gpgpu_shader_core_pipeline 1536:32
+-gpgpu_shader_cta 32
+-gpgpu_simd_model 1
+
+# Pipeline widths and number of FUs
+# ID_OC_SP,ID_OC_DP,ID_OC_INT,ID_OC_SFU,ID_OC_MEM,OC_EX_SP,OC_EX_DP,OC_EX_INT,OC_EX_SFU,OC_EX_MEM,EX_WB,ID_OC_TENSOR_CORE,OC_EX_TENSOR_CORE
+-gpgpu_pipeline_widths 4,4,4,4,4,4,4,4,4,4,8,4,4
+-gpgpu_num_sp_units 4
+-gpgpu_num_sfu_units 4
+-gpgpu_num_dp_units 4
+-gpgpu_num_int_units 4
+-gpgpu_tensor_core_avail 1
+-gpgpu_num_tensor_core_units 4
+
+# Instruction latencies and initiation intervals
+# "ADD,MAX,MUL,MAD,DIV"
+# All Div operations are executed on SFU unit
+-ptx_opcode_latency_int 4,4,4,4,21
+-ptx_opcode_initiation_int 2,2,2,2,2
+-ptx_opcode_latency_fp 4,4,4,4,39
+-ptx_opcode_initiation_fp 2,2,2,2,4
+-ptx_opcode_latency_dp 55,55,55,55,330
+-ptx_opcode_initiation_dp 64,64,64,64,130
+-ptx_opcode_latency_sfu 23
+-ptx_opcode_initiation_sfu 8
+-ptx_opcode_latency_tesnor 64
+-ptx_opcode_initiation_tensor 64
+
+# sub core model: in which each scheduler has its own register file and EUs
+# i.e. schedulers are isolated
+-gpgpu_sub_core_model 1
+# disable specialized operand collectors and use generic operand collectors instead
+-gpgpu_enable_specialized_operand_collector 0
+-gpgpu_operand_collector_num_units_gen 8
+-gpgpu_operand_collector_num_in_ports_gen 8
+-gpgpu_operand_collector_num_out_ports_gen 8
+# register banks
+-gpgpu_num_reg_banks 8
+-gpgpu_reg_file_port_throughput 2
+
+# warp scheduling
+-gpgpu_num_sched_per_core 4
+-gpgpu_scheduler gto
+# a warp scheduler issue mode
+-gpgpu_max_insn_issue_per_warp 1
+-gpgpu_dual_issue_diff_exec_units 1
+
+## L1/shared memory configuration
+# <nsets>:<bsize>:<assoc>,<rep>:<wr>:<alloc>:<wr_alloc>:<set_index_fn>,<mshr>:<N>:<merge>,<mq>:**<fifo_entry>
+# ** Optional parameter - Required when mshr_type==Texture Fifo
+# In adaptive cache, we adaptively assign the remaining shared memory to L1 cache
+# For more info, see https://docs.nvidia.com/cuda/cuda-c-programming-guide/index.html#shared-memory-7-x
+-gpgpu_adaptive_cache_config 1
+-gpgpu_shmem_option 0,8,16,32,64,100
+-gpgpu_unified_l1d_size 128
+# L1 cache configuration
+-gpgpu_l1_banks 4
+-gpgpu_cache:dl1 S:4:128:64,L:T:m:L:L,A:384:48,16:0,32
+-gpgpu_l1_latency 33
+-gpgpu_gmem_skip_L1D 0
+-gpgpu_flush_l1_cache 1
+-gpgpu_n_cluster_ejection_buffer_size 32
+-gpgpu_l1_cache_write_ratio 25
+
+# shared memory  configuration
+-gpgpu_shmem_size 102400
+-gpgpu_shmem_sizeDefault 102400
+-gpgpu_shmem_per_block 49152
+-gpgpu_smem_latency 29
+# shared memory bankconflict detection
+-gpgpu_shmem_num_banks 32
+-gpgpu_shmem_limited_broadcast 0
+-gpgpu_shmem_warp_parts 1
+-gpgpu_coalesce_arch 86
+
+# L2 cache
+-gpgpu_cache:dl2 S:64:128:16,L:B:m:L:P,A:192:4,32:0,32
+-gpgpu_cache:dl2_texture_only 0
+-gpgpu_dram_partition_queues 64:64:64:64
+-gpgpu_perf_sim_memcpy 0
+-gpgpu_memory_partition_indexing 2
+
+# 128 KB Inst.
+-gpgpu_cache:il1 N:64:128:16,L:R:f:N:L,S:2:48,4
+-gpgpu_inst_fetch_throughput 4
+# 128 KB Tex
+# Note, TEX is deprected since Volta, It is used for legacy apps only. Use L1D cache instead with .nc modifier or __ldg mehtod
+-gpgpu_tex_cache:l1 N:4:128:256,L:R:m:N:L,T:512:8,128:2
+# 64 KB Const
+-gpgpu_const_cache:l1 N:128:64:8,L:R:f:N:L,S:2:64,4
+-gpgpu_perfect_inst_const_cache 1
+
+# interconnection
+# use built-in local xbar
+-network_mode 2
+-icnt_in_buffer_limit 512
+-icnt_out_buffer_limit 512
+-icnt_subnets 2
+-icnt_flit_size 40
+-icnt_arbiter_algo 1
+
+# memory partition latency config
+-gpgpu_l2_rop_latency 186
+-dram_latency 254
+
+# dram sched config
+-gpgpu_dram_scheduler 1
+-gpgpu_frfcfs_dram_sched_queue_size 64
+-gpgpu_dram_return_queue_size 192
+
+# dram model config
+-gpgpu_n_mem_per_ctrlr 1
+-gpgpu_dram_buswidth 2
+-gpgpu_dram_burst_length 16
+-dram_data_command_freq_ratio 4
+-gpgpu_mem_address_mask 1
+-gpgpu_mem_addr_mapping dramid@8;00000000.00000000.00000000.00000000.0000RRRR.RRRRRRRR.RBBBCCCC.BCCSSSSS
+
+# Mem timing
+-gpgpu_dram_timing_opt nbk=16:CCD=4:RRD=11:RCD=21:RAS=47:RP=21:RC=67:CL=21:WL=7:CDLR=9:WR=21:nbkgrp=4:CCDL=6:RTPL=4
+-dram_dual_bus_interface 0
+
+# select lower bits for bnkgrp to increase bnkgrp parallelism
+-dram_bnk_indexing_policy 0
+-dram_bnkgrp_indexing_policy 1
+
+#-dram_seperate_write_queue_enable 1
+#-dram_write_queue_size 64:56:32
+
+# stat collection
+-gpgpu_memlatency_stat 14
+-gpgpu_runtime_stat 500
+-enable_ptx_file_line_stats 1
+-visualizer_enabled 0
+
+# power model configs, disable it untill we create a real energy model
+-power_simulation_enabled 0
+
+# tracing functionality
+#-trace_enabled 1
+#-trace_components WARP_SCHEDULER,SCOREBOARD
+#-trace_sampling_core 0