NES2Wii - NES/SNES/N64/SMD/DualShock gamepad to Wii remote adapter
Features:
- You can play Wii virtual console games using original NES/SNES/N64/SMD/DualShock gamepad!
- You can connect Wiimote to PC via bluetooth and use original NES/SNES/N64/SMD/DualShock controllers with emulators
Just ATMEGA16 (or any other ATMEGA, just recompile source code). And yes, you need 20MHz crystal for N64 support. 8MHz is fine if you don't need N64.
- Low fuse: 0xCF
- High fuse: 0xC9
Just install HID Wiimote driver by Julian Lohr: http://julianloehr.de/educational-work/hid-wiimote/
- ATMEGA16A, 20MHz crystal
- ATMEGA8, 8MHz (without N64 support)
- NES, SNES, N64, SMD and DualShock controllers
There are three modes for NES/SNES/SMD controllers:
- Mode #1 - d-pad works as left analog stick and d-pad on classic controller at the same time
- Mode #2 - d-pad works as left analog stick only
- Mode #3 - d-pad works as d-pad only
You can hold Start+A+B for a few seconds to change mode. Green led will blink 1/2/3 times indicating new mode.
- You can select pins and required controllers in defines.h.
- Detect (DTCT) wire is optional but recommended to prevent some glitches. If not used it must be connected directly to VCC.
- Now working with new Wii U games like Mario Kart 8. Some protection against unlicensed controllers?
Alexey 'Cluster' Avdyukhin