Add support for Arduino UNO Q (Qualcomm QRB2210)

config/boards/arduino-uno-q.csc

@@ -0,0 +1,49 @@
+# Qualcomm QRB2210 4 core 2/4GB RAM SoC USB-C
+BOARD_NAME="Arduino UNO Q"
+BOARD_VENDOR="arduino"
+BOARDFAMILY="qrb2210"
+BOARD_MAINTAINER=""
+KERNEL_TARGET="edge"
+BOOTCONFIG="qcom_defconfig"
+BOOT_FDT_FILE="qcom/qrb2210-arduino-imola.dtb"
+SERIALCON="ttyMSM0"
+BOOTFS_TYPE="fat"
+BOOTSIZE="512"
+
+function post_family_tweaks__arduino-uno-q() {
+	display_alert "Installing packages" "${BOARD}" "info"
+
+	# Install packages
+	do_with_retries 3 chroot_sdcard_apt_get_update
+	do_with_retries 3 chroot_sdcard_apt_get_install \
+		rmtfs qrtr-tools protection-domain-mapper tqftpserv \
+		bluetooth bluez gdisk adbd qbootctl
+
+	# ADB branding
+	chroot_sdcard sed -i 's/"Debian"/"Armbian"/' /usr/lib/android-sdk/platform-tools/adbd-usb-gadget
+	chroot_sdcard sed -i 's/"ADB device"/"Arduino UNO Q"/' /usr/lib/android-sdk/platform-tools/adbd-usb-gadget
+
+	# Enable services
+	chroot_sdcard systemctl enable adbd.service
+	chroot_sdcard systemctl enable qbootctl.service
+	chroot_sdcard systemctl enable armbian-resize-filesystem-qcom.service
+}
+
+function post_family_tweaks_bsp__arduino-uno-q_resize_rootfs() {
+	display_alert "Installing rootfs resize script" "${BOARD}" "info"
+	install -Dm755 "$SRC/packages/bsp/arduino/armbian-resize-filesystem-qcom" "$destination/usr/lib/armbian/armbian-resize-filesystem-qcom"
+	install -Dm644 "$SRC/packages/bsp/arduino/armbian-resize-filesystem-qcom.service" "$destination/usr/lib/systemd/system/armbian-resize-filesystem-qcom.service"
+}
+
+function post_family_tweaks_bsp__arduino-uno-q_bsp_firmware_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "info"
+	declare file_added_to_bsp_destination
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/initramfs-hook-qcm2290-fw" <<- 'FIRMWARE_HOOK'
+		#!/bin/bash
+		[[ "$1" == "prereqs" ]] && exit 0
+		. /usr/share/initramfs-tools/hook-functions
+		add_firmware "qcom/qcm2290/a702_zap.mbn"
+		add_firmware "qcom/a702_sqe.fw"
+	FIRMWARE_HOOK
+	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
+}

config/bootenv/qrb2210.txt

@@ -0,0 +1,3 @@
+verbosity=1
+bootlogo=false
+console=serial

config/bootscripts/boot-qrb2210.cmd

@@ -0,0 +1,75 @@
+# DO NOT EDIT THIS FILE
+#
+# Please edit /boot/armbianEnv.txt to set supported parameters
+#
+
+# Set load addresses for Qualcomm QRB2210
+# These must be set explicitly because ABL overwrites defaults at runtime
+setenv kernel_addr_r "0xc0000000"
+setenv fdt_addr_r "0xc3000000"
+setenv ramdisk_addr_r "0xc4000000"
+setenv load_addr "0xd4000000"
+setenv overlay_error "false"
+
+# Qualcomm eMMC device and boot partition (0x43 = GPT partition 67 "efi")
+setenv devtype "mmc"
+setenv devnum "0"
+test -n "${distro_bootpart}" || setenv distro_bootpart "43"
+
+# default values
+setenv rootdev "/dev/mmcblk0p1"
+setenv verbosity "1"
+setenv console "serial"
+setenv bootlogo "false"
+setenv rootfstype "ext4"
+setenv docker_optimizations "on"
+
+echo "Boot script loaded from ${devtype} ${devnum}:${distro_bootpart}"
+
+if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}armbianEnv.txt; then
+	load ${devtype} ${devnum}:${distro_bootpart} ${load_addr} ${prefix}armbianEnv.txt
+	env import -t ${load_addr} ${filesize}
+fi
+
+if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
+if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyMSM0,115200n8 ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
+
+# get PARTUUID of partition the boot script was loaded from
+if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:${distro_bootpart} partuuid; fi
+
+setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} clk_ignore_unused pd_ignore_unused audit=0 deferred_probe_timeout=30 ${extraargs} ${extraboardargs}"
+
+if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory"; fi
+
+load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r} ${prefix}uInitrd
+load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}Image
+
+load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+fdt addr ${fdt_addr_r}
+fdt resize 65536
+for overlay_file in ${overlays}; do
+	if load ${devtype} ${devnum}:${distro_bootpart} ${load_addr} ${prefix}dtb/qcom/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
+		echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+for overlay_file in ${user_overlays}; do
+	if load ${devtype} ${devnum}:${distro_bootpart} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
+		echo "Applying user provided DT overlay ${overlay_file}.dtbo"
+		fdt apply ${load_addr} || setenv overlay_error "true"
+	fi
+done
+if test "${overlay_error}" = "true"; then
+	echo "Error applying DT overlays, restoring original DT"
+	load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
+fi
+
+booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
+
+# Recompile with:
+# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr