zynq7015_linux_base

zynq armv7 embeded linux fs whit PS ETH and serial port

Build version

--Ubuntu 16.04

--Petalinux 2017.4

--Vivado 2017.4

running Step

1 copy the image.ub and BOOT.bin to sd/tf card (format the card to fat32 if not)

2 config the board start from sd card

3 connect to serial cable and plug the card to board, Then power on！

4 open the serial terminal in the pc , watch the output

5 using the root (user name) to login, pwd root(same with user name)

6 connect the ETH cable with the PS PHY port, you should watch the macb .... link up(1000/Full) print in the terminal

7 In the terminal using ifconfig to show the eth port status