feat: add ERC20 transfer benchmark for Porto with passkey

[Dargon789]

• feat: add ERC20 transfer benchmark for Porto with passkey

Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs.

• Uses secp256k1 passkey for transaction signing
• Sets execution permissions for ERC20 transfers
• Requires spend limits (set to max) for passkey operations
• Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits)
• Provides clean measurement of passkey overhead (~19k gas)

Resolves #272

🤖 Generated with Claude Code

• feat: allow early refunds by recipient in escrow

• feat: add callSansTo support to ERC7821 execute

• chore: improvements and fixes to ERC7821Ithaca

• chore: add address(0) replacement to new compute digest

• fix: sanitize upper bits before checking replacement + tests

• feat: do not add replay safe wrapper if sig is eoa

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• chore: use auto-assign-pr.yml org action

• fix: combine improvements from PRs fix(GuardedExecutor): use execute-specific super admin error in setCallChecker #357, chore: fix typos across codebase #314, and fix incorrect comment #379

Combines the following fixes:

• PR fix(GuardedExecutor): use execute-specific super admin error in setCallChecker #357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker
• PR chore: fix typos across codebase #314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.)
• PR fix incorrect comment #379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max)

🤖 Generated with Claude Code

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: subaccount design using spend function

• test: complete subaccount flow with unit test

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: add merkle sigs natively into the account

• fix: tests

• test: add more sophisticated fuzz test

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: fix and simplify multichain design (feat: fix and simplify multichain design #327)

• feat: simplify multichain nonce design

• chore: readd merkle verification prefix

• chore: undo blank line addns

• chore: lint

• chore: redundant multichain bool

• fix: lint

• .

• feat: remove intent struct (feat: remove intent struct #365)

• feat: simplify multichain nonce design

• chore: readd merkle verification prefix

• chore: undo blank line addns

• chore: lint

• .

• ~50 failing tests down to 5

• down to 1 failing test

• fixed failing test

• chore: remove console logs and bench

• .

• Update test/Base.t.sol

• Update src/Orchestrator.sol

• Update test/utils/mocks/MockPayerWithSignatureOptimized.sol

• chore: final cleanup, rebench

• Update src/Orchestrator.sol

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator

• chore: cleanup

• rebase

• fix

---

• feat: native merkle sig verification in Account

• chore: fmt

• chore: unify merkle sig flow for orchestrator multi chain intents

• chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator

• Add .circleci/config.yml (feat: Account Recovery #1)

Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow

CI:

Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine

• Update ci.yaml

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• save local changes before merge

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

• Revert "Merge branch 'master'"

This reverts commit 6c02fbf, reversing changes made to a317ddb.

• Create CNAME (fix: Fixed broken link to Foundry config in foundry.toml #9)

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

• Revert "Merge branch 'master'"

This reverts commit 6c02fbf, reversing changes made to a317ddb.

---

• Update ci.yaml (Tracking: Accounts v1.0 #10)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Potential fix for code scanning alert no. 3: Workflow does not contain permissions (showcase simple payment flow #15)

https://github.com/Dargon789/account/security/code-scanning/3

• Update ci.yaml (Gas comparison for pre-paid vs post-paid execute #16)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Delete CNAME

• Update Brutalizer.sol

• Potential fix for code scanning alert no. 2: Workflow does not contain permissions (Combined updates 2 #17)

• Refactor deployment scripts and update configs

Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments.

• Fix commit user email format in CI workflow (Document what the public key is for each keytype #18)

Dargon789@30a2096

• Potential fix for code scanning alert no. 4: Workflow does not contain permissions (Combined updates 3 #19)

• Potential fix for code scanning alert no. 1: Workflow does not contain permissions (Simplify, new EIP7702 tailored proxy, redeploy #20)

• Update ci.yaml (fix: prevent division by zero in _brutalizeMemory() #21)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Master (Delegatecall mode fix and redeploy #22)

• Merge branch 'master' (Fix broken link in foundry.toml #8)

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

---

• Revert "fix vm block accoount (Combined updates #11)" (Fuzz / invariant tests #13)

Reverts #11

Summary by Sourcery
CI:

Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f.

---

• Update ci.yaml

• Refactor function signatures and formatting for consistency

Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made.

• Add Multicall3 simulation support to Simulator

Introduces Multicall3 simulation methods in Simulator.sol, enabling simulation of orchestrator calls with pre-execution calls via Multicall3. Adds IMulticall3 interface, updates related tests to cover multicall simulation flows, and includes minor formatting and interface signature changes for consistency.

• feat: add multicall to simulator (feat: add multicall to simulator #402) (Tidy and optimize #24)

• feat: add multicall to simulator (feat: add multicall to simulator #402)

• feat: add multicall to simulator

• chore: add gas test

• chore: review fixes

• chore: fmt contracts and update gas snapshots

• test: add tests for getContextKeyHash in Account.t.sol (test: add tests for getContextKeyHash in Account.t.sol #412)

---

• Fix commit user email formatting in CI workflow

• Revert "feat: add multicall to simulator (feat: add multicall to simulator #402) (Tidy and optimize #24)" (Add simulation helpers to EntryPoint and redeploy #26)

This reverts commit 1aef318.

• Delete .circleci directory (Fix: Delegation PayEntryPoint #27)

• Default ignored files

• Potential fix for code scanning alert no. 3: Workflow does not contain permissions (♻️ Normify EntryPoint #32)

• .snapshot_worktree

• Delete .idea directory (♻️ Tidy #35)

• pre-commit

• pre-commit

• deploy execute_config.sh

• Update forge-std

• Update check-bytecode-changes.js

• pre-commit

• chore: bump contract versions due to bytecode changes

• chore: bump contract versions due to bytecode changes

• chore: bump contract versions due to bytecode changes

contracts update

• v0.5.11

• chore: unify merkle sig flow for orchestrator multi chain intents

• test: add tests for getContextKeyHash in Account.t.sol (test: add tests for getContextKeyHash in Account.t.sol #412)

• Refactor function signatures and formatting for consistency

• Legion (BLS Signature Implementation #38)

• feat: add ERC20 transfer benchmark for Porto with passkey

Add testERC20TransferViaPortoOrchestratorWithPasskey() benchmark to isolate passkey authentication costs from spend limit enforcement costs.

• Uses secp256k1 passkey for transaction signing
• Sets execution permissions for ERC20 transfers
• Requires spend limits (set to max) for passkey operations
• Gas cost: 116,094 (vs 97,030 without passkey, 117,083 with restrictive limits)
• Provides clean measurement of passkey overhead (~19k gas)

Resolves #272

🤖 Generated with Claude Code

• feat: allow early refunds by recipient in escrow

• feat: add callSansTo support to ERC7821 execute

• chore: improvements and fixes to ERC7821Ithaca

• chore: add address(0) replacement to new compute digest

• fix: sanitize upper bits before checking replacement + tests

• feat: do not add replay safe wrapper if sig is eoa

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• chore: use auto-assign-pr.yml org action

• fix: combine improvements from PRs fix(GuardedExecutor): use execute-specific super admin error in setCallChecker #357, chore: fix typos across codebase #314, and fix incorrect comment #379

Combines the following fixes:

• PR fix(GuardedExecutor): use execute-specific super admin error in setCallChecker #357: Replace SuperAdminCanSpendAnything with SuperAdminCanExecuteEverything in setCallChecker
• PR chore: fix typos across codebase #314: Fix typos across codebase (overriden→overridden, Calcualated→Calculated, etc.)
• PR fix incorrect comment #379: Correct inline comment about approval amount (20-byte all-ones, not type(uint256).max)

🤖 Generated with Claude Code

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: subaccount design using spend function

• test: complete subaccount flow with unit test

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: add merkle sigs natively into the account

• fix: tests

• test: add more sophisticated fuzz test

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount

• feat: fix and simplify multichain design (feat: fix and simplify multichain design #327)

• feat: simplify multichain nonce design

• chore: readd merkle verification prefix

• chore: undo blank line addns

• chore: lint

• chore: redundant multichain bool

• fix: lint

• .

• feat: remove intent struct (feat: remove intent struct #365)

• feat: simplify multichain nonce design

• chore: readd merkle verification prefix

• chore: undo blank line addns

• chore: lint

• .

• ~50 failing tests down to 5

• down to 1 failing test

• fixed failing test

• chore: remove console logs and bench

• .

• Update test/Base.t.sol

• Update src/Orchestrator.sol

• Update test/utils/mocks/MockPayerWithSignatureOptimized.sol

• chore: final cleanup, rebench

• Update src/Orchestrator.sol

• chore: bump contract versions due to bytecode changes - Contracts updated: IthacaAccount,Orchestrator,SimpleFunder,Simulator

• chore: cleanup

• rebase

• fix

---

• feat: native merkle sig verification in Account

• chore: fmt

• chore: unify merkle sig flow for orchestrator multi chain intents

• chore: bump contract versions due to bytecode changes - Contracts updated: Orchestrator,SimpleFunder,Simulator

• Add .circleci/config.yml (feat: Account Recovery #1)

Add CircleCI configuration file to set up a basic pipeline with a say-hello job and workflow

CI:

Add .circleci/config.yml to define a say-hello job that checks out the code and prints a greeting using the cimg/base Docker image Add a workflow to orchestrate the say-hello job under the CircleCI 2.1 engine

• Update ci.yaml

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

• Revert "Merge branch 'master'"

This reverts commit 6c02fbf, reversing changes made to a317ddb.

• Create CNAME (fix: Fixed broken link to Foundry config in foundry.toml #9)

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

• Revert "Merge branch 'master'"

This reverts commit 6c02fbf, reversing changes made to a317ddb.

---

• Update ci.yaml (Tracking: Accounts v1.0 #10)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Potential fix for code scanning alert no. 3: Workflow does not contain permissions (showcase simple payment flow #15)

https://github.com/Dargon789/account/security/code-scanning/3

• Update ci.yaml (Gas comparison for pre-paid vs post-paid execute #16)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Delete CNAME

• Update Brutalizer.sol

• Potential fix for code scanning alert no. 2: Workflow does not contain permissions (Combined updates 2 #17)

• Refactor deployment scripts and update configs

Migrates deployment scripts to use fork-based configuration loading, removes legacy CircleCI and GitHub workflow files, and introduces a registry-based contract deployment record. Updates .env.example, README, and foundry configuration. Removes LayerZero vendor and test files, adds devtools submodule, and improves LayerZeroSettler configuration logic for multi-chain deployments.

• Fix commit user email format in CI workflow (Document what the public key is for each keytype #18)

Dargon789@30a2096

• Potential fix for code scanning alert no. 4: Workflow does not contain permissions (Combined updates 3 #19)

• Potential fix for code scanning alert no. 1: Workflow does not contain permissions (Simplify, new EIP7702 tailored proxy, redeploy #20)

• Update ci.yaml (fix: prevent division by zero in _brutalizeMemory() #21)

reback use test
CI and automation chores (#394)
Dargon789@7dd8a5d

• Master (Delegatecall mode fix and redeploy #22)

• Merge branch 'master' (Fix broken link in foundry.toml #8)

• Update ci.yaml (feat: Identity #2)

CI:
Update Forge test command to use --rerun and increase verbosity to -vvvvv

• Update ci.yaml (Draft #4)

Enhance the CI test step to automatically rerun failed tests and increase verbosity in Forge. CI:
Enable the --rerun flag for Forge tests to retry failures automatically Increase Forge test verbosity from -vvv to -vvvvv

• Update ci.yaml (Draft updates 1 #5)

Change Forge test invocation from "forge test --rerun -vvvvv" to "forge test -vvv"

• Update ci.yaml

• Create CNAME

---

• Revert "fix vm block accoount (Combined updates #11)" (Fuzz / invariant tests #13)

Reverts #11

Summary by Sourcery
CI:

Update the Forge test command in the CI workflow to enable reruns and increase verbosity. This reverts commit 942017f.

---

• Update ci.yaml

• Refactor function signatures and formatting for consistency

Updated function signatures in IFunder and SimpleFunder for single-line style, and improved code formatting in IthacaAccount, test/Account.t.sol, test/Benchmark.t.sol, and test/LayerZeroSettler.t.sol for readability and consistency. No logic changes were made.

• Delete .circleci directory (Fix: Delegation PayEntryPoint #27)

• Default ignored files

• .snapshot_worktree

• Delete .idea directory (♻️ Tidy #35)

• pre-commit

• pre-commit

• deploy execute_config.sh

• Update forge-std

• Update check-bytecode-changes.js

• pre-commit

• chore: bump contract versions due to bytecode changes

• chore: bump contract versions due to bytecode changes

• chore: bump contract versions due to bytecode changes

contracts update

• v0.5.11

• chore: unify merkle sig flow for orchestrator multi chain intents

• test: add tests for getContextKeyHash in Account.t.sol (test: add tests for getContextKeyHash in Account.t.sol #412)

• Refactor function signatures and formatting for consistency

---

• Add .idea configs and tweak .env comments

Add IntelliJ IDEA project files under .idea and lib/.idea (modules, caches, iml, vcs, and a .gitignore) and update the lib/forge-std gitlink (submodule) reference. Also adjust .env.example by removing spaces before inline comments on RPC URLs (UPGRADE_TEST_RPC_URL, RPC_1, RPC_11155111) to standardize formatting.

• Normalize file modes and update forge-std submodule

Remove executable bit from deploy/execute_config.sh, deploy/verify_config.sh, and prep/check-bytecode-changes.js (mode 100755 → 100644). Update lib/forge-std submodule from commit c2cf7017d27c1d20e74ace4dacb6c5ce4bbbe899 to 07853315f998f94dc724e464b1bab1270888ee64. No other content changes.

---