Adapter for two Super Nintendo (SNES) gamepads using an Arduino Leonardo Pro Micro from Dome's Blog - Building a USB SNES Controller (https://blog.chybby.com/posts/building-a-usb-snes-controller). There are two code options to use:
- Joystick Library (https://github.com/MHeironimus/ArduinoJoystickLibrary)
- HID Library (https://github.com/NicoHood/HID)
Both works great, but usin HID Library the system shows three gamepads, but just two functional.
- Arduino Pro Micro (Leonardo)
- 2 SNES female conectors - you can cut an extension cable.
- USB-C cable.
- Soldering skills.
- Solder cables as schematic image.
- Install the library you decide to use.
- Upload correspondent sketch to your board.
- Play.
- Three devices in Windows instead of two. HID issue.
┌──────────────┬───────────┐
│ 1 2 3 4 │ 5 6 7 )
└──────────────┴───────────┘
Pin 1: 5V
Pin 2: Data_Clock (Arduino: Pin 2)
Pin 3: Data_Latch (Arduino: Pin 3)
Pin 4: Data_Serial (Arduino: Pin A0 / A1)
Pin 5: N/A
Pin 6: N/A
Pin 7: GND
