Skip to content

05 creds modules

Jump to bottom
André Henrique edited this page Jun 2, 2026 · 1 revision

Credential Modules

Language: English (en-US) | pt-BR: ../pt-BR/05-modulos-creds.md

Overview

Credential modules test SSH, Telnet, FTP, HTTP Basic/Digest/Form, SNMP, and vendor-specific login interfaces against authorized targets using built-in default credential lists or custom wordlists.

Each credential module inherits from a generic protocol base class and adds vendor-specific default credential pairs. All modules run dictionary attacks with configurable concurrency and behavior.

Authorization required. Use only on systems you own or have explicit written permission to test.

Module directory structure

embedxpl/modules/creds/
├── cameras/        IP cameras, NVRs, DVRs — 40+ camera vendor folders
│   ├── acti/           ftp_default_creds, ssh_default_creds, telnet_default_creds, webinterface_http_form_default_creds
│   ├── american_dynamics/
│   ├── arecont/
│   ├── avigilon/
│   ├── avtech/
│   ├── axis/           + webinterface_http_auth_default_creds
│   ├── basler/         + webinterface_http_form_default_creds
│   ├── bosch/          + webinterface_http_auth_default_creds
│   ├── brickcom/       + webinterface_http_auth_default_creds
│   ├── canon/          + webinterface_http_auth_default_creds
│   ├── cbc_ganz/       + webinterface_http_auth_default_creds
│   ├── cisco/
│   ├── dahua/          + webinterface_http_auth_default_creds
│   ├── dlink/
│   ├── dvtel/          + webinterface_http_auth_default_creds
│   ├── dynacolor/      + webinterface_http_auth_default_creds
│   ├── everfocus/      + webinterface_http_auth_default_creds
│   ├── flir/           + webinterface_http_auth_default_creds
│   ├── foscam/         + webinterface_http_auth_default_creds
│   ├── geovision/
│   ├── grandstream/
│   ├── hikvision/      ftp, ssh, telnet
│   ├── honeywell/
│   ├── intelbras/      webinterface_default_creds
│   └── ...many more...
│
├── bmc/            Baseboard Management Controllers
│   ├── asus_asmb/
│   ├── dell_idrac/
│   └── supermicro/
│
└── (routers, firewalls, switches, nas, printers — many vendor subfolders)

Common options (all credential modules)

Option Type Required Default Accepted values Description
target OptIP Yes "" IPv4, IPv6, hostname, file://path Target host or file with IPs (one per line for multi-target)
port OptPort No Protocol default 1–65535 Service port to test
threads OptInteger No 8 1–300 Number of parallel connection threads
defaults OptWordlist No Vendor-specific user:pass, comma-separated pairs, or file://path Credential list to try
stop_on_success OptBool No True true, false Stop testing after first successful credential
verbosity OptBool No True true, false Show each credential attempt in the output
timeout OptInteger No 10 1–120 Per-connection timeout in seconds

Protocol default ports:

Protocol Default port
Telnet 23
SSH 22
FTP 21
HTTP Basic/Digest 80
HTTP Form / HTTPS 443
SNMP 161

Module types by protocol

telnet_default_creds — Telnet

Tests Telnet login with vendor default credentials. Uses telnetlib3 on Python 3.13+ and telnetlib on earlier versions.

Terminal session (Hikvision camera):

exf > use creds/cameras/hikvision/telnet_default_creds
exf (Hikvision Camera Default Telnet Creds) > show options

Target options:
┌────────┬──────────────────┬───────────────────────────────────────────────────┐
│ Name   │ Current settings │ Description                                       │
├────────┼──────────────────┼───────────────────────────────────────────────────┤
│ target │                  │ Target IPv4, IPv6 address or file with ip:port    │
│ port   │ 23               │ Target Telnet port                                │
└────────┴──────────────────┴───────────────────────────────────────────────────┘

Module options:
┌──────────────────┬──────────────────┬────────────────────────────────────────────────────┐
│ Name             │ Current settings │ Description                                        │
├──────────────────┼──────────────────┼────────────────────────────────────────────────────┤
│ threads          │ 8                │ Number of threads                                  │
│ defaults         │ admin:12345      │ User:Pass or file with default credentials (file://)│
│ stop_on_success  │ True             │ Stop on first valid authentication attempt         │
│ verbosity        │ True             │ Display authentication attempts                    │
└──────────────────┴──────────────────┴────────────────────────────────────────────────────┘

exf (Hikvision Camera Default Telnet Creds) > set target 192.168.1.100
[+] target => 192.168.1.100
exf (Hikvision Camera Default Telnet Creds) > run
[*] Running module ...
[*] Trying admin:12345 on 192.168.1.100:23
[+] SUCCESS: admin:12345 — telnet session obtained

Terminal session (all credentials fail):

exf (Hikvision Camera Default Telnet Creds) > run
[*] Running module ...
[*] Trying admin:12345 on 192.168.1.100:23
[-] FAIL: admin:12345
[-] No valid credentials found

Terminal session (Dahua camera — multiple defaults):

exf > use creds/cameras/dahua/telnet_default_creds
exf (Dahua Camera/DVR/NVR Default Telnet Creds) > set target 192.168.1.50
[+] target => 192.168.1.50
exf (Dahua Camera/DVR/NVR Default Telnet Creds) > run
[*] Running module ...
[*] Trying admin:admin on 192.168.1.50:23
[-] FAIL: admin:admin
[*] Trying 888888:888888 on 192.168.1.50:23
[+] SUCCESS: 888888:888888 — telnet session obtained

ssh_default_creds — SSH

Tests SSH login with vendor default credentials using Paramiko.

Option Type Default Description
target OptIP "" Target IP or file://
port OptPort 22 SSH port
threads OptInteger 8 Concurrency
defaults OptWordlist Vendor-specific Default credential pairs
stop_on_success OptBool True Stop on first success
verbosity OptBool True Show attempts

Terminal session (Hikvision camera SSH):

exf > use creds/cameras/hikvision/ssh_default_creds
exf (Hikvision Camera Default SSH Creds) > set target 192.168.1.100
[+] target => 192.168.1.100
exf (Hikvision Camera Default SSH Creds) > run
[*] Running module ...
[*] Trying admin:12345 on 192.168.1.100:22
[-] FAIL: admin:12345
[*] Trying root:hikadmin on 192.168.1.100:22
[+] SUCCESS: root:hikadmin — SSH session opened

Terminal session (Axis camera SSH):

exf > use creds/cameras/axis/ssh_default_creds
exf (Axis Camera Default SSH Creds) > set target 192.168.1.110
[+] target => 192.168.1.110
exf (Axis Camera Default SSH Creds) > run
[*] Running module ...
[*] Trying root: on 192.168.1.110:22
[+] SUCCESS: root: (empty password) — SSH session opened

ftp_default_creds — FTP

Tests FTP login using vendor default credentials.

Option Type Default Description
target OptIP "" Target IP or file://
port OptPort 21 FTP port
threads OptInteger 8 Concurrency
defaults OptWordlist Vendor-specific Default credential pairs
stop_on_success OptBool True Stop on first success
verbosity OptBool True Show attempts

Terminal session:

exf > use creds/cameras/hikvision/ftp_default_creds
exf (Hikvision Camera Default FTP Creds) > set target 192.168.1.100
[+] target => 192.168.1.100
exf (Hikvision Camera Default FTP Creds) > run
[*] Running module ...
[*] Trying admin:12345 on 192.168.1.100:21
[+] SUCCESS: admin:12345 — FTP session opened
230 Login successful.

webinterface_http_auth_default_creds — HTTP Basic/Digest Auth

Tests HTTP Basic authentication or Digest authentication endpoints with vendor default credentials.

Option Type Default Description
target OptIP "" Target IP
port OptPort 80 HTTP port
ssl OptBool False Use HTTPS
threads OptInteger 8 Concurrency
defaults OptWordlist Vendor-specific Default credential pairs
stop_on_success OptBool True Stop on first success

Terminal session (Dahua camera web interface):

exf > use creds/cameras/dahua/webinterface_http_auth_default_creds
exf (Dahua Camera/DVR/NVR Default HTTP Auth Creds) > set target 192.168.1.50
[+] target => 192.168.1.50
exf (Dahua Camera/DVR/NVR Default HTTP Auth Creds) > set port 80
[+] port => 80
exf (Dahua Camera/DVR/NVR Default HTTP Auth Creds) > run
[*] Running module ...
[*] Trying admin:admin on http://192.168.1.50:80
[-] FAIL: admin:admin (HTTP 401)
[*] Trying admin:888888 on http://192.168.1.50:80
[+] SUCCESS: admin:888888 (HTTP 200)

Terminal session (Axis camera HTTP auth):

exf > use creds/cameras/axis/webinterface_http_auth_default_creds
exf (Axis Camera Default HTTP Auth Creds) > set target 192.168.1.110
[+] target => 192.168.1.110
exf (Axis Camera Default HTTP Auth Creds) > run
[*] Running module ...
[*] Trying root: on http://192.168.1.110:80
[+] SUCCESS: root: (empty password) — HTTP 200

webinterface_http_form_default_creds — HTTP Form Login

Tests vendor-specific HTTP login form endpoints (POST-based authentication).

Terminal session (ACTi camera):

exf > use creds/cameras/acti/webinterface_http_form_default_creds
exf (ACTi Camera Default HTTP Form Creds) > set target 192.168.1.120
[+] target => 192.168.1.120
exf (ACTi Camera Default HTTP Form Creds) > run
[*] Running module ...
[*] Trying admin:123456 on http://192.168.1.120:80/cgi-bin/encoder?USER=admin&PWD=123456
[+] SUCCESS: admin:123456 — HTTP form login successful

webinterface_default_creds — Intelbras cameras

Intelbras cameras use a combined web interface module:

exf > use creds/cameras/intelbras/webinterface_default_creds
exf (Intelbras Camera Default Creds) > set target 192.168.1.130
[+] target => 192.168.1.130
exf (Intelbras Camera Default Creds) > run
[*] Running module ...
[*] Trying admin:admin on 192.168.1.130:80
[+] SUCCESS: admin:admin — web session obtained

Vendor coverage (cameras)

The following camera vendors have at least one credential module (ftp_default_creds, ssh_default_creds, telnet_default_creds, and/or webinterface_*_default_creds):

Vendor ftp ssh telnet webinterface
ACTi Yes Yes Yes form
American Dynamics Yes Yes Yes —
Arecont Yes Yes Yes auth
Avigilon Yes Yes Yes —
AVTech Yes Yes Yes —
Axis Yes Yes Yes auth
Basler Yes Yes Yes form
Bosch Yes Yes Yes auth
Brickcom Yes Yes Yes auth
Canon Yes Yes Yes auth
CBC/GANZ Yes Yes Yes auth
Cisco (cameras) Yes Yes Yes —
Dahua Yes Yes Yes auth
D-Link (cameras) Yes Yes Yes —
DVTel Yes Yes Yes auth
Dynacolor Yes Yes Yes auth
EverFocus Yes Yes Yes auth
FLIR Yes Yes Yes auth
Foscam Yes Yes Yes auth
GeoVision Yes Yes Yes —
Grandstream Yes Yes Yes —
Hikvision Yes Yes Yes —
Honeywell Yes Yes Yes —
Intelbras — — — combined

Multi-target credential testing

Use file:// protocol for the target option to test multiple hosts from a file:

exf > use creds/cameras/hikvision/telnet_default_creds
exf (Hikvision Camera Default Telnet Creds) > set target file:///tmp/hikvision_hosts.txt
[+] target => file:///tmp/hikvision_hosts.txt
exf (Hikvision Camera Default Telnet Creds) > run
[*] Running module ...
[*] Trying admin:12345 on 192.168.1.100:23
[*] Trying admin:12345 on 192.168.1.101:23
[*] Trying admin:12345 on 192.168.1.102:23
[+] SUCCESS: admin:12345 on 192.168.1.100:23
[+] SUCCESS: admin:12345 on 192.168.1.102:23
[-] FAIL: all credentials exhausted for 192.168.1.101

/tmp/hikvision_hosts.txt format:

192.168.1.100
192.168.1.101
192.168.1.102:23

Custom wordlist

Override the built-in defaults with a custom wordlist file:

exf (Hikvision Camera Default Telnet Creds) > set defaults file:///tmp/custom_creds.txt
[+] defaults => file:///tmp/custom_creds.txt

Wordlist format — one credential pair per line, colon-separated:

admin:admin
admin:password
admin:12345
admin:
root:root
root:
guest:guest
service:service

Non-interactive examples

Telnet scan (D-Link router)

embedxpl -m creds/routers/dlink/telnet_default_creds -s "target 192.168.1.1"
[*] Running module ...
[*] Trying admin:admin on 192.168.1.1:23
[-] FAIL: admin:admin
[*] Trying admin:1234 on 192.168.1.1:23
[+] SUCCESS: admin:1234 — telnet session obtained

SSH scan (TP-Link router)

embedxpl -m creds/routers/tplink/ssh_default_creds -s "target 192.168.0.1"
[*] Running module ...
[*] Trying admin:admin on 192.168.0.1:22
[-] FAIL: admin:admin
[*] Trying admin:tplink on 192.168.0.1:22
[+] SUCCESS: admin:tplink — SSH session opened

HTTPS web interface (Dahua camera)

embedxpl \
    -m creds/cameras/dahua/webinterface_http_auth_default_creds \
    -s "target 192.168.1.50" \
    -s "port 443" \
    -s "ssl true"
[*] Running module ...
[*] Trying admin:admin on https://192.168.1.50:443
[-] FAIL: admin:admin (HTTP 401)
[*] Trying admin:888888 on https://192.168.1.50:443
[+] SUCCESS: admin:888888 (HTTP 200)

Multi-target from file

embedxpl \
    -m creds/cameras/hikvision/telnet_default_creds \
    -s "target file:///tmp/hosts.txt" \
    -s "threads 16" \
    -s "stop_on_success false"
[*] Multi-target mode: file:///tmp/hosts.txt
[*] Trying admin:12345 on 192.168.1.100:23
[*] Trying admin:12345 on 192.168.1.101:23
[+] SUCCESS: admin:12345 on 192.168.1.100:23
[-] FAIL on 192.168.1.101 — no valid credentials

Viewing bundled wordlists

exf (telnet_default_creds) > show wordlists

┌────────────────────────┬──────────────────────────────────────────────────────────────────────┐
│ Wordlist               │ Path                                                                 │
├────────────────────────┼──────────────────────────────────────────────────────────────────────┤
│ hikvision_defaults.txt │ file:///usr/local/lib/python3.11/site-packages/embedxpl/resources/.. │
│ common_passwords.txt   │ file:///usr/local/lib/python3.11/site-packages/embedxpl/resources/.. │
└────────────────────────┴──────────────────────────────────────────────────────────────────────┘

Error cases

Target not specified:

exf (Hikvision Camera Default Telnet Creds) > run
[*] Running module ...
[-] target is required but not set

Connection refused:

exf (Hikvision Camera Default Telnet Creds) > run
[*] Trying admin:12345 on 192.168.1.100:23
[-] Connection refused: 192.168.1.100:23

Connection timeout:

exf (Hikvision Camera Default Telnet Creds) > run
[*] Trying admin:12345 on 192.168.1.100:23
[-] Connection timed out after 10s: 192.168.1.100:23

Invalid file path:

exf (Hikvision Camera Default Telnet Creds) > set target file:///nonexistent/hosts.txt
[+] target => file:///nonexistent/hosts.txt
exf (Hikvision Camera Default Telnet Creds) > run
[-] File not found: /nonexistent/hosts.txt

SNMP community bruteforce (generic)

SNMP community string testing is available via:

  • generic/snmp/snmp_bruteforce — standalone generic SNMP bruteforcer
  • creds/generic/snmp_community_bruteforce (if present)

See 08-generic-modules.md for the SNMP module reference.

Tips

  1. Set verbosity false to suppress per-attempt output when running batch scans.
  2. Set threads 16 for faster scanning on LAN targets (default 8).
  3. Use stop_on_success false to collect all valid credentials (e.g., when multiple accounts have default passwords).
  4. Combine with discover to find hosts and then target them: discover → get IPs → feed to creds module via file://.
  5. For routers with SNMP: always try public and private community strings — they are embedded defaults across most vendors.

Wiki hub

EmbedXPL-Forge v3.2.1 | GitHub | PyPI | Issues

pip install embedxpl | pip install firewallxpl | pip install printerxpl-forge | pip install wirelessxpl | pip install mikrotikapi-bf

EmbedXPL-Forge v3.4.0

Home | Home-pt-BR

English (en-US)

Getting Started

Modules

Shell & Post-Exploitation

Tools & Infrastructure

Reference

Portugues (pt-BR)

Comecar

Modulos

Shell e Pos-Exploracao

Ferramentas e Infraestrutura

Referencia

Clone this wiki locally