Update OQS Release Tags

curl/Dockerfile

@@ -1,8 +1,8 @@
 # Define build arguments for version tags, installation paths, and configurations.
 ARG ALPINE_VERSION=3.21
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG CURL_VERSION=8.14.0
 ARG INSTALLDIR=/opt/oqssa
 
@@ -143,4 +143,4 @@ RUN addgroup -g 1000 -S oqs && \
 
 USER oqs
 CMD ["serverstart.sh"]
-STOPSIGNAL SIGTERM
+STOPSIGNAL SIGTERM

epiphany/Dockerfile

@@ -5,8 +5,8 @@ ARG INSTALLDIR=/opt/oqssa
 
 # OpenSSL/OQS Versions
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 
 # architecture to build on
 ARG ARCH=x86_64

h2load/Dockerfile

@@ -3,8 +3,8 @@
 # Define build arguments for version tags, installation paths, and configurations.
 ARG ALPINE_VERSION=3.21
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.12.0
-ARG OQSPROVIDER_TAG=0.8.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG NGHTTP2_TAG=v1.64.0
 ARG INSTALLDIR=/opt/oqssa
 

haproxy/Dockerfile

@@ -1,8 +1,8 @@
 # Define build arguments for version tags, installation paths, and configurations.
 ARG ALPINE_VERSION=3.21
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG HAPROXY_RELEASE=3.0
 ARG HAPROXY_MICRO=5
 ARG HAPROXY_VERSION=${HAPROXY_RELEASE}.${HAPROXY_MICRO}
@@ -129,4 +129,4 @@ ENV PATH=${HAPROXYDIR}/sbin:$PATH
 # Expose ports and set entrypoint
 EXPOSE 4433
 STOPSIGNAL SIGTERM
-CMD ["/opt/haproxy/start.sh"]
+CMD ["/opt/haproxy/start.sh"]

mosquitto/Dockerfile

@@ -5,10 +5,10 @@
 ARG OPENSSL_TAG=openssl-3.4.0
 
 # define the liboqs tag to be used
-ARG LIBOQS_TAG=0.13.0
+ARG LIBOQS_TAG=0.14.0
 
 # define the oqsprovider tag to be used
-ARG OQSPROVIDER_TAG=0.9.0
+ARG OQSPROVIDER_TAG=0.10.0
 
 # Default location where all binaries wind up:
 ARG INSTALLDIR=/opt/oqssa

nginx/Dockerfile

@@ -1,8 +1,8 @@
 # Define build arguments for version tags, installation paths, and configurations
 ARG ALPINE_VERSION=3.21
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.15.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG NGINX_VERSION=1.28.0
 ARG BASEDIR="/opt"
 ARG INSTALLDIR=${BASEDIR}/nginx

nodejs/Dockerfile

@@ -5,8 +5,8 @@ ARG INSTALLDIR=/opt/oqssa
 
 # OpenSSL/OQS Versions
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 
 # Nodejs specific versions, Always use an LTS version for nodejs
 ARG NODEJS_VERSION=v22.16.0

openssh/Dockerfile

@@ -1,7 +1,7 @@
 # Define build arguments for version tags, installation paths, and configurations
 # Note: Changing LIBOQS_TAG may require updates in sshd_config and ssh_config
 ARG ALPINE_VERSION=3.21
-ARG LIBOQS_TAG=0.13.0
+ARG LIBOQS_TAG=0.14.0
 ARG OQS_OPENSSH_RELEASE="OQS-v9"
 ARG DEFAULT_INSTALL_DIR=/opt/oqs-ssh
 ARG INSTALL_DIR=${DEFAULT_INSTALL_DIR}
@@ -133,4 +133,4 @@ COPY entrypoint.sh .
 RUN chmod a+x ./entrypoint.sh
 
 ENTRYPOINT [ "./entrypoint.sh" ]
-CMD [ "/bin/sh" ]
+CMD [ "/bin/sh" ]

openssl3/Dockerfile

@@ -1,8 +1,8 @@
 # Define build arguments for version tags, installation paths, and configurations
 ARG ALPINE_VERSION=3.21
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.12.0
-ARG OQSPROVIDER_TAG=0.8.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 
 ARG INSTALLDIR_OPENSSL=/opt/openssl
 ARG INSTALLDIR_LIBOQS=/opt/liboqs
@@ -136,4 +136,4 @@ RUN addgroup -g 1000 -S oqs && \
     chmod go+r ${INSTALLDIR_OPENSSL}/bin/CA.key
 
 CMD ["/opt/openssl/bin/serverstart.sh"]
-STOPSIGNAL SIGTERM
+STOPSIGNAL SIGTERM

openvpn/Dockerfile

@@ -1,8 +1,8 @@
 # Define build arguments for version tags, installation paths, and configurations
 ARG UBUNTU_VERSION=24.04
 ARG OPENSSL_TAG=openssl-3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG OPENVPN_TAG=v2.6.14
 ARG INSTALLDIR=/opt/oqssa
 ARG OPENVPNDIR=/home/openvpn
@@ -106,4 +106,4 @@ COPY createcerts_and_config.sh ${INSTALLDIR}/bin
 # Set working directory for the OpenVPN service
 WORKDIR ${OPENVPNDIR}
 CMD ["serverstart.sh"]
-STOPSIGNAL SIGTERM
+STOPSIGNAL SIGTERM

wireshark/Dockerfile

@@ -2,8 +2,8 @@
 ARG UBUNTU_VERSION=24.04
 ARG WIRESHARK_VERSION=4.4.7
 ARG OPENSSL_TAG=3.4.0
-ARG LIBOQS_TAG=0.13.0
-ARG OQSPROVIDER_TAG=0.9.0
+ARG LIBOQS_TAG=0.14.0
+ARG OQSPROVIDER_TAG=0.10.0
 ARG INSTALLDIR=/opt/oqs
 
 # Stage 1: Build - Compile and assemble all necessary components and dependencies
@@ -148,4 +148,4 @@ COPY --from=build ${INSTALLDIR}/ssl ${INSTALLDIR}/ssl
 # Ensure runtime directory exists with correct permissions
 RUN mkdir -p ${XDG_RUNTIME_DIR} && chmod 0700 ${XDG_RUNTIME_DIR}
 
-CMD ["sh", "-c", "wireshark"]
+CMD ["sh", "-c", "wireshark"]