Releases: quiret/Marlin
Binary for ATmega2560 MightyBoard RevE (CTC Bizer clone)
Here is a sample binary of the latest Marlin Firmware version working fine on the CTC Bizer Dual board, clone of the MightyBoard RevE with ATmega2560 MCU. It is configured for the standard interface cable display using SailfishLCD driver. The temperature sensors have been disabled so please recompile because this is a promotional copy only! TMC2130_STANDALONE has been chosen for all stepper drivers.
The Marlin FW team does not want to give up on 8bit AVR support. So let's make this world a better place by giving it a good update.
Have fun! 🥳
Binaries using async SPI (DMA)
Promotional sample of the compiled firmware for a variety of boards with the SPI bus sharing fix. Configured for TMC2130 steppers over SPI, MKS TS35-R V2.0 screen and SD card support. Flash it onto the board and have fun! Follow flashing instructions of the manufacturer.
Now with USE_SPI_DMA_TC which allows asynchronous drawing to screen! Empower your 3D printer with this special release Marlin FW!
Please support this pull request at Marlin official: MarlinFirmware#24911
For wiring of the board with the screen, please check out the posts inside the aforementioned pull-request.
- BTT SKR V1.4
- MKS TinyBee V1.0
- MKS Robin E3D V1.1
FINAL WIRING OF MKS TinyBee V1.0: please recompile the firmware from source!
Buy the hardware: https://aliexpress.com/item/1005004888596430.html
Have fun! 🥳
Binary for MKS Robin E3D V1.1
Promotional sample of the compiled firmware for the MKS Robin E3D V1.1 board with the SPI bus sharing fix. Configured for TMC2130 steppers over SPI, MKS TS35-R V2.0 screen and SD card support. Flash it onto the board and have fun! Follow flashing instructions of the manufacturer over here: https://github.com/makerbase-mks/MKS-Robin-E3-E3D/wiki/Marlin_firmware
Please support this pull request at Marlin official: MarlinFirmware#24911
IMPORTANT RELIABILITY HOTFIX (24.10.2022): turned on SD_CHECK_AND_RETRY to prevent random wandering-off of the printer toolhead (why is it a design decision to forget these checks anyway?)
Buy the hardware: https://aliexpress.com/item/1005004888596430.html